Re: [Bacula-users] One SD two subnets
2011-08-08 06:47:59
>>>>> On Tue, 02 Aug 2011 15:31:39 +0200, Simone Martina said:
>
> I got a little problem: I have a bacula director on a server with two
> NIC interfaces, each of one got a different subnet: 172.20.60.0/24 and
> 172.20.61.0/24 and I could only use a single LTO-4 tape reader.
> Now, the problem is howto configure storage section in director
> configuration file, because the differnt client (from the two nets)
> should receive two different IP to contact SD.
>
> Now I have tried this storage config:
> Storage {
> Name = TAPECORP
> Address = 172.20.60.1
The best option is to use
Address = baculaserver
and then use the resolver (DNS or /etc/hosts) to map baculaserver to the
correct IP address on each machine.
__Martin
------------------------------------------------------------------------------
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
The must-attend event for mobile developers. Connect with experts.
Get tools for creating Super Apps. See the latest technologies.
Sessions, hands-on labs, demos & much more. Register early & save!
http://p.sf.net/sfu/rim-blackberry-1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|