I've noticed the following error with a new tape library.
While moving the tape with mtx the web gui shows the move as succeeded,
but then moves to show it as 'calibrating'. When it does this, mtx
reports the error below. Has anyone notice this, and is there anything
to be done?

mtx -f /dev/sg4 load 1
Loading media from Storage Element 1 into drive 0...mtx: Request Sense:
Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Hardware Error
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 44
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
MOVE MEDIUM from Element Address 256 to 32 Failed

-- 
Rory Campbell-Lange
rory AT campbell-lange DOT net

Campbell-Lange Workshop
www.campbell-lange.net
0207 6311 555
3 Tottenham Street London W1T 2AF
Registered in England No. 04551928

------------------------------------------------------------------------------
Free Software Download: Index, Search & Analyze Logs and other IT data in 
Real-Time with Splunk. Collect, index and harness all the fast moving IT data 
generated by your applications, servers and devices whether physical, virtual
or in the cloud. Deliver compliance at lower cost and gain new business 
insights. http://p.sf.net/sfu/splunk-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users