I have an ADIC scalar 24 autoloader with two drives. Drive 1 (/dev/st0) is currently being written to via a bacula job. Drive2 (/dev/st1) has a volume mounted in the drive but is not being used. Both were previously working.The problem is that Drive 2 won’t eject/unload the current volume.
Also, another oddity is that mtx is reporting that both drives contain ‘Unknown Storage Element Loaded’:
[root@monk bacula]# mtx -f /dev/sg3 status
Storage Changer /dev/sg3:2 Drives, 23 Slots ( 1 Import/Export )
Data Transfer Element 0:Full (Unknown Storage Element Loaded):VolumeTag =
Data Transfer Element 1:Full (Unknown Storage Element Loaded):VolumeTag =
….
When I try to unload the Drive 2 (accessed as Element 1 above) into slot 1, which is empty, I get the following error.
[root@monk bacula]# mtx -f /dev/sg3 unload 1 1
Unloading Data Transfer Element into Storage Element 1...mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Hardware Error
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 53
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
MOVE MEDIUM from Element Address 257 to 4096 Failed
I have even attempted a physical eject of the drive, no dice. Wonder if this is hardware related or if I’m missing something.
Appreciate your help.
Thanks,
JJ
Jeremiah Jester
Senior Informatics Specialist
Microbiology, Katze Lab
Box 357242
P: 206-732-6185