Bacula-users

Re: [Bacula-users] accessing 2nd drive

2010-06-18 16:39:36
Subject: Re: [Bacula-users] accessing 2nd drive
From: "Jeremiah D. Jester" <jjest AT u.washington DOT edu>
To: "Jeremiah D. Jester" <jjest AT u.washington DOT edu>, "bacula-users AT lists.sourceforge DOT net" <bacula-users AT lists.sourceforge DOT net>
Date: Fri, 18 Jun 2010 13:36:23 -0700

Am also receiving these messages… Odd that Drive1 auto loads but Drive2 does not.

 

18-Jun 13:24 bacula01-sd JobId 0: 3301 Issuing autochanger "loaded? drive 0" command.

18-Jun 13:24 bacula01-sd JobId 0: 3302 Autochanger "loaded? drive 0", result is Slot 17.

18-Jun 13:24 bacula01-sd JobId 0: 3301 Issuing autochanger "loaded? drive 0" command.

18-Jun 13:24 bacula01-sd JobId 0: 3302 Autochanger "loaded? drive 0", result is Slot 17.

18-Jun 13:24 bacula01-sd: Fatal Error at device.c:298 because:

dev open failed: dev.c:491 Unable to open device "Drive2" (/dev/st1): ERR=No medium found

 

18-Jun 13:24 bacula01-sd JobId 0: Error: stored.c:551 Could not open device "Drive2" (/dev/st1)

 

 

From: Jeremiah D. Jester [mailto:jjest AT u.washington DOT edu]
Sent: Friday, June 18, 2010 1:33 PM
To: bacula-users AT lists.sourceforge DOT net
Subject: [Bacula-users] accessing 2nd drive

 

I have a autoloader that has two drives in it. For some reason, Drive1 is only being utilized and jobs are being backlogged in the que without taking advantage of the other drives. Any ideas why this might be? I’ve included info from bconsole and bacula-sd.conf.

 

Thanks!

JJ

Bacula-sd.conf

Autochanger {

        Name = ADIC_Scalar_24

        Device = Drive1

        Device = Drive2

        Changer Device = /dev/sg3

        Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"

}

Device {

        Name=Drive1

        Media Type = LTO2

        Archive Device = /dev/st0

        Autochanger = yes

        AutomaticMount = yes;

        AlwaysOpen = yes;

        LabelMedia = no;

        RemovableMedia = yes;

        Random Access = no;

}

Device {

        Name=Drive2

        Media Type = LTO2

        Archive Device = /dev/st1

        Autochanger = yes

        AutomaticMount = yes;

        AlwaysOpen = yes;

        LabelMedia = no;

        RemovableMedia = yes;

        Random Access = no;

}

 

Bconsole.

Device status:

Autochanger "ADIC_Scalar_24" with devices:

   "Drive1" (/dev/st0)

   "Drive2" (/dev/st1)

Device "Drive1" (/dev/st0) is mounted with:

    Volume:      KL0410

    Pool:        Onsite

    Media type:  LTO2

    Device is being initialized.

    Slot 17 is loaded in drive 0.

    Total Bytes Read=0 Blocks Read=0 Bytes/block=0

    Positioned at File=0 Block=0

Device "Drive2" (/dev/st1) is not open.

    Slot 17 is loaded in drive 0.

Device "FileStorage" (/tmp) is not open.

 

 

 

Jeremiah Jester

Senior Informatics Specialist

Microbiology, Katze Lab

Box 357242

P: 206-732-6185

 

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>