|
Re: [Bacula-users] unload tape error
2010-06-08 13:33:19
2010/6/8 Jeremiah D. Jester <jjest AT u.washington DOT edu>:
> I’m having problems simply unloading a tape from my changer. Also, not sure
> if the ‘Hardware Error’ is due to me addressing the device incorrectly or if
> there is actually an issue. No more info found in the logs. Any ideas?
>
>
>
> Thanks,
>
> JJ
>
>
>
> [root@monk bacula]# mtx -f /dev/sg3 status
>
> Storage Changer /dev/sg3:2 Drives, 23 Slots ( 1 Import/Export )
>
> Data Transfer Element 0:Full (Storage Element 2 Loaded):VolumeTag = KL0354
>
> Data Transfer Element 1:Full (Storage Element 21 Loaded):VolumeTag = KL0343
>
> Storage Element 1:Full :VolumeTag=KL0388
>
> Storage Element 2:Empty:VolumeTag=
>
> Storage Element 3:Full :VolumeTag=KL0357
>
> Storage Element 4:Full :VolumeTag=KL0368
>
> Storage Element 5:Full :VolumeTag=KL0360
>
> Storage Element 6:Full :VolumeTag=KL0308
>
> Storage Element 7:Full :VolumeTag=KL0421
>
> Storage Element 8:Full :VolumeTag=KL0420
>
> Storage Element 9:Full :VolumeTag=KL0442
>
> Storage Element 10:Full :VolumeTag=KL0398
>
> Storage Element 11:Full :VolumeTag=KL0309
>
> Storage Element 12:Full :VolumeTag=KL0400
>
> Storage Element 13:Full :VolumeTag=KL0318
>
> Storage Element 14:Full :VolumeTag=000108
>
> Storage Element 15:Full :VolumeTag=KL0389
>
> Storage Element 16:Full :VolumeTag=000102
>
> Storage Element 17:Full :VolumeTag=KL0410
>
> Storage Element 18:Full :VolumeTag=KL0317
>
> Storage Element 19:Full :VolumeTag=KL0439
>
> Storage Element 20:Full :VolumeTag=KL0369
>
> Storage Element 21:Empty:VolumeTag=
>
> Storage Element 22:Full :VolumeTag=KL0328
>
> Storage Element 23 IMPORT/EXPORT:Empty:VolumeTag=
>
>
>
> [root@monk bacula]# mtx -f /dev/sg3 unload /dev/sg3:1 2
>
> Unloading Data Transfer Element into Storage Element 2...mtx: Request Sense:
> Long Report=yes
>
> mtx: Request Sense: Valid Residual=no
>
> mtx: Request Sense: Error Code=70 (Current)
>
> mtx: Request Sense: Sense Key=Hardware Error
>
> mtx: Request Sense: FileMark=no
>
> mtx: Request Sense: EOM=no
>
> mtx: Request Sense: ILI=no
>
> mtx: Request Sense: Additional Sense Code = 53
>
> mtx: Request Sense: Additional Sense Qualifier = 00
>
> mtx: Request Sense: BPV=no
>
> mtx: Request Sense: Error in CDB=no
>
> mtx: Request Sense: SKSV=no
>
> MOVE MEDIUM from Element Address 256 to 4097 Failed
>
>
>
> [root@monk bacula]# mtx -f /dev/sg3 unload 2
>
> Unloading Data Transfer Element into Storage Element 2...mtx: Request Sense:
> Long Report=yes
>
> mtx: Request Sense: Valid Residual=no
>
> mtx: Request Sense: Error Code=70 (Current)
>
> mtx: Request Sense: Sense Key=Hardware Error
>
> mtx: Request Sense: FileMark=no
>
> mtx: Request Sense: EOM=no
>
> mtx: Request Sense: ILI=no
>
> mtx: Request Sense: Additional Sense Code = 53
>
> mtx: Request Sense: Additional Sense Qualifier = 00
>
> mtx: Request Sense: BPV=no
>
> mtx: Request Sense: Error in CDB=no
>
> mtx: Request Sense: SKSV=no
>
> MOVE MEDIUM from Element Address 256 to 4097 Failed
>
>
Bacula does this at times. I have this happen 1 time per 3 months.
Stop bacula-sd. Then unload the st driver then the scsi driver. Then
try to unload the tape manually in the archive. Then reverse your
steps. And finally update slots.
There was a thread about this 1 to 2 months ago but I can not find it
at the moment.
John
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|
