Dear All,

I have just finished setting up bacula 5.0.2 and have no problem in
backing up local host, while it complained the following error when I
add a second client :-

Fatal error: Failed to connect to Storage daemon: server:9103 12-May
12:41 server-dir JobId 17: Fatal error: Bad response to Storage
command: wanted 2000 OK storage , got 2902 Bad storage

I then tried to local the storage daemon server's 9103 port from the
second client but failed. While I can successfully telnet to 9103 port
from storage daemon server localhost. Have checked no firewall is
running on the storage daemon server. I then run the sd with -d100
with the following output:-


[root@server sbin]# ./bacula-sd -d100 -c /etc/bacula/bacula-sd.conf
bacula-sd: stored_conf.c:698-0 Inserting director res: server-mon
bacula-sd: stored_conf.c:698-0 Inserting device res: LTO-4
[root@server sbin]# server-sd: jcr.c:138-0 read_last_jobs seek to 188
server-sd: jcr.c:145-0 Read num_items=10
server-sd: jcr.c:611-0 setting my_thread_stuffs 0x0 => 0xb7de4b90
server-sd: stored.c:534-0 calling init_dev /tmp
server-sd: dev.c:284-0 init_dev: tape=0 dev_name=/tmp
server-sd: stored.c:536-0 SD init done /tmp
server-sd: stored.c:534-0 calling init_dev /dev/nst0
server-sd: dev.c:284-0 init_dev: tape=1 dev_name=/dev/nst0
server-sd: stored.c:536-0 SD init done /dev/nst0
server-sd: autochanger.c:272-0 Run program=/etc/bacula/mtx-changer
/dev/sg4 loaded 0 /dev/nst0 0
server-sd: bnet_server.c:96-0 Addresses host[ipv4:0.0.0.0:9103]
server-sd: autochanger.c:274-0 run_prog: /etc/bacula/mtx-changer
/dev/sg4 loaded 0 /dev/nst0 0 stat=0 result=2
server-sd: stored.c:549-0 calling first_open_device "LTO-4" (/dev/nst0)
server-sd: dev.c:361-0 open dev: type=2 dev_name="LTO-4" (/dev/nst0)
vol= mode=OPEN_READ_ONLY
server-sd: dev.c:411-0 Open dev: device is tape
server-sd: dev.c:426-0 Try open "LTO-4" (/dev/nst0) mode=OPEN_READ_ONLY
server-sd: dev.c:448-0 Rewind after open
server-sd: dev.c:2585-0 In set_os_device_parameters
server-sd: dev.c:2591-0 Set block size to zero
server-sd: dev.c:2607-0 MTSETDRVBUFFER
server-sd: dev.c:500-0 open dev: tape 3 opened
server-sd: dev.c:374-0 preserve=0x0 fd=3
server-sd: label.c:81-0 Enter read_volume_label res=0 device="LTO-4"
(/dev/nst0) vol= dev_Vol=*NULL*

Volume Label:
Id                : Bacula 1.0 immortal
VerNo             : 11
VolName           : Daily-0002
PrevVolName       :
VolFile           : 0
LabelType         : VOL_LABEL
LabelSize         : 179
PoolName          : Daily
MediaType         : LTO-4
PoolType          : Backup
HostName          : server
Date label written: 06-May-2010 19:52
server-sd: label.c:236-0 Call reserve_volume=Daily-0002


I attached the relevant portion of bacula-sd.conf and  bacula-dir.conf
for your quick reference:-

bacula-sd.conf
Storage {                             # definition of myself
  Name = server-sd
  SDPort = 9103                  # Director's port
  WorkingDirectory = "/var/bacula/working"
  Pid Directory = "/var/run"
  Maximum Concurrent Jobs = 20
}

bacula-dir.conf
Storage {
  Name = LTO-4
# Do not use "localhost" here
  Address = server                # N.B. Use a fully qualified name here
  SDPort = 9103
  Password = "44QsasdfNNasdf7bPa2asdfDR7vYbeRejW2PKDKsadfm"
  Device = ULT3580-HH4
  Autochanger = yes
  Media Type = LTO-4
  Maximum Concurrent Jobs = 1
}


What seems to goes wrong here? My current running OS is CentOS 5.4.

Frank

------------------------------------------------------------------------------

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users