Re: [Bacula-users] bcopy fails: "No Volume name given"
2010-04-24 11:50:02
Thomas Mueller pisze:
> hi gani
>
> thanks, tried it, but same error:
>
> # bcopy -v -c /etc/bacula/bacula-sd.conf -i000035L4 -oCOPY000035L4 /dev/nst0
> /srv/FileStorage -p
> bcopy: butil.c:281 Using device: "/dev/nst0" for reading.
> 23-Apr 07:29 bcopy JobId 0: Invalid slot=0 defined in catalog for Volume
> "000035L4" on "SuperLoader3-LTO4" (/dev/nst0). Manual load may be required.
> 23-Apr 07:29 bcopy JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 23-Apr 07:29 bcopy JobId 0: 3302 Autochanger "loaded? drive 0", result is
> Slot 6.
> 23-Apr 07:29 bcopy JobId 0: Ready to read from volume "000035L4" on device
> "SuperLoader3-LTO4" (/dev/nst0).
> bcopy: butil.c:284 Using device: "/srv/FileStorage" for writing.
> 23-Apr 07:29 bcopy: Fatal Error at bcopy.c:204 because:
> dev open failed: Could not open file device "FileStorage" (/srv/FileStorage).
> No Volume name given.
>
>
> if I try /srv/FileStorage/COPY000035L4 as output device it tells me it
> could not find the device in bacula-sd.conf.
>
> I'm going to think, that the utility is broken with file devices.
Hi,
You are right. Previously I used Bacula 5.0.0 and the bcopy works well.
Today I checked the bcopy from Bacula 5.0.1. I have the same effect. I
reported it as bug.
http://bugs.bacula.org/view.php?id=1560
Now it is fixed.
Regards.
gani
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|