openit admin wrote:
> thanks for your help; ok I understand and I have changed the config. 
> When I run the job I get the following:
> 
> Run Copy job
> JobName:       Full Backup Copy
> Bootstrap:     *None*
> Client:        kapital-backup-fd
> FileSet:       Full Linux Set
> Pool:          Full-Pool (From Job resource)
> Read Storage:  File (From Pool resource)
> Write Storage: LTO2Drive (From Storage from Pool's NextPool resource)
> JobId:         *None*
> When:          2010-04-20 09:30:38
> Catalog:       MyCatalog
> Priority:      10
> OK to run? (yes/mod/no): yes
> Job queued. JobId=175
> 
> I thin this looks correct. But nothing happens; the job is in state 
> running. with "status storage=LTO2Ultrium" I get
> 
> Device status:
> Device "FileStorage" (/backup/bacula) is mounted with:
>     Volume:      BackupFull-0001
>     Pool:        *unknown*
>     Media type:  File
>     Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>     Positioned at File=0 Block=0
> Device "Ultrium-LTO2" (/dev/nst0) is not open.
>     Device is BLOCKED waiting to create a volume for:
>        Pool:        Tape-Pool
>        Media type:  LTO-2
> ====
> 
> Used Volume status:
> BackupFull-0001 on device "FileStorage" (/backup/bacula)
>     Reader=1 writers=0 devres=0 volinuse=1
> BackupFull-0001 read volume JobId=163
> BackupFull-0001 read volume JobId=175
> 
> a tape is inserted; but nothing happens.

Hi,

Do you have any tapes labeled in pool Tape-Pool or tapes in Tape-Pool 
with 'Append' status? If not, you should label it.

Regards
gani

------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users