Hi John,
I found that this script is not checking if mtx or mt binaries are on
the path.
This can be a serious disability for not experienced user.
BR
Tomek
Dnia 16-04-2010 o godz. 20:17 John Drescher napisał(a):
> On Fri, Apr 16, 2010 at 2:03 PM, Tomasz Gorny <tgorn AT wp DOT pl> wrote:
> > Hello,
> >
> > I'm using bacula some time. After moving to new hardware I've this
> > problem:
> >
> > ==========
> > 16-Apr 19:55 backup01_dir JobId 11745: Using Device "PV124T-LT03"
> > 16-Apr 19:55 backup01_sd JobId 11745: 3301 Issuing autochanger "loaded?
> > drive 0" command.
> > 16-Apr 19:55 backup01_sd JobId 11745: 3302 Autochanger "loaded? drive
> > 0", result: nothing loaded.
> > 16-Apr 19:55 backup01_sd JobId 11745: 3304 Issuing autochanger "load
> > slot 1, drive 0" command.
> > *
> > *
> > You have messages.
> > *mess
> > 16-Apr 19:56 backup01_sd JobId 11745: 3305 Autochanger "load slot 1,
> > drive 0", status is OK.
> > 16-Apr 19:56 backup01_sd JobId 11745: Error: dev.c:474 Unable to open
> > device "PV124T-LT03" (/dev/nst0): ERR=No medium found
> > 16-Apr 19:56 backup01_sd JobId 11745: Recycled volume "000034L3" on
> > device "PV124T-LT03" (/dev/nst0), all previous data lost.
> >
> > Can you advice ?
> >
>
> You may need to tailor your mtx-changer script to your drive. It looks
> like mtx-changer said the tape was loaded and returned but the tape
> was not finished. Then in the same minute the tape was finished and
> bacula continued.
>
> John
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
