On Fri, Apr 16, 2010 at 2:03 PM, Tomasz Gorny <tgorn AT wp DOT pl> wrote:
> Hello,
>
> I'm using bacula some time. After moving to new hardware I've this
> problem:
>
> ==========
> 16-Apr 19:55 backup01_dir JobId 11745: Using Device "PV124T-LT03"
> 16-Apr 19:55 backup01_sd JobId 11745: 3301 Issuing autochanger "loaded?
> drive 0" command.
> 16-Apr 19:55 backup01_sd JobId 11745: 3302 Autochanger "loaded? drive
> 0", result: nothing loaded.
> 16-Apr 19:55 backup01_sd JobId 11745: 3304 Issuing autochanger "load
> slot 1, drive 0" command.
> *
> *
> You have messages.
> *mess
> 16-Apr 19:56 backup01_sd JobId 11745: 3305 Autochanger "load slot 1,
> drive 0", status is OK.
> 16-Apr 19:56 backup01_sd JobId 11745: Error: dev.c:474 Unable to open
> device "PV124T-LT03" (/dev/nst0): ERR=No medium found
> 16-Apr 19:56 backup01_sd JobId 11745: Recycled volume "000034L3" on
> device "PV124T-LT03" (/dev/nst0), all previous data lost.
>
> Can you advice ?
>
You may need to tailor your mtx-changer script to your drive. It looks
like mtx-changer said the tape was loaded and returned but the tape
was not finished. Then in the same minute the tape was finished and
bacula continued.
John
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
