Re: [Bacula-users] How to re-use existing volumes in pool?
2010-03-23 09:27:06
Sean Carolan wrote:
>> you need to edit the "Pool" resource ("Maximum Volume Jobs" and "Volume
>> Retention") in bacula-dir.conf
>
> Thank you, Thomas. I have read through the manual section on the Pool
> resource. Here is one of my pool definitions:
>
> Pool {
> Name = BackupPC_pool
> Pool Type = Backup
> Volume Retention = 5 days
> Recycle = yes
> AutoPrune = yes
> MaximumVolumeJobs = 1
> }
>
> Shouldn't this configuration automatically recycle volumes if I run my
> backup once a week? My current process goes something like this:
>
> 1. Unmount tape that is in the drive
> 2. Run the "purge" command to wipe the volumes for my next backup
> 3. Run "mtx -f /dev/sg0 load #" to load up the next tape
> 4. Run "mount" to get the tape ready
> 5. Run my backup
>
there should be no need to do anything manually.
did you restart bacula-dir (or "reload" on bconsole) and "update volumes
from resource" in bconsole (or bat) after changing the bacula-dir.conf ?
- Thomas
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|