Re: [Bacula-users] Bacula spool on SSD -- solid state driveperformance testing?
2009-07-24 07:09:35
I'm interested in what parameters for what scheduler you're using. Did you test
using synthetic benchmarks or with the production configuration?
Regards, Mark
-----Ursprüngliche Nachricht-----
Von: Ralf Gross [mailto:Ralf-Lists AT ralfgross DOT de]
Gesendet: Freitag, 24. Juli 2009 09:18
An: bacula-users AT lists.sourceforge DOT net
Betreff: Re: [Bacula-users] Bacula spool on SSD -- solid state driveperformance
testing?
...
I simply use a 2 disk (SATA) software RAID0 for each of our 3 LTO-4
drives. The server has 12 disk bays, so there is enouth space for
more disks if needed. I usually run only one job per drive, but with
changing some linux io scheduler paramters, I even get decent read
performance while a second job is writing to the same RAID0 device.
Ralf
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|