-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Rick Knight wrote:
> John Drescher wrote:
>> On Mon, Apr 6, 2009 at 12:08 PM, Rick Knight <rick_knight AT rlknight DOT
>> com> wrote:
>>
>>> Hello,
>>>
>>> Sorry for the repost, but I really need some help with this.
>>>
>>> My system suffered a hard drive crash last month and now I'm trying to
>>> restore from a backup that was running when the drive died. I've
>>> re-installed my system on a new had drive and installed MySQL and Bacula
>>> (from Kubuntu repsitories) and modified Bacula to use my DDS-4 drive.
>>> I've run bscan and I think it was successful, here's the output of the
>>> command...
>>>
>>> root@rick-desktop:~# bscan -s -m -c bacula-sd.conf -v -V rick_temp-01
>>> /dev/nst0 -PSaveIt
>>> bscan: butil.c:282 Using device: "/dev/nst0" for reading.
>>> 04-Apr 19:17 bscan JobId 0: Ready to read from volume "rick_temp-01" on
>>> device "DDS-4" (/dev/nst0).
>>> bscan: bscan.c:293 Using Database: bacula, User: bacula
>>> bscan: bscan.c:436 Pool record for Scratch found in DB.
>>> bscan: bscan.c:450 Pool type "Backup" is OK.
>>> bscan: bscan.c:921 Created Media record for Volume: rick_temp-01
>>> bscan: bscan.c:478 Media type "DDS-4" is OK.
>>> bscan: bscan.c:488 VOL_LABEL: OK for Volume: rick_temp-01
>>> bscan: bscan.c:992 Created Client record for Client: rick-fd
>>> bscan: bscan.c:1075 Created new JobId=1 record for original JobId=1976
>>> 04-Apr 19:24 bscan JobId 0: End of file 1 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> bscan: bscan.c:688 32,768 file records. At file:blk=1:16,067
>>> bytes=1,035,886,662
>>> 04-Apr 19:31 bscan JobId 0: End of file 2 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 19:39 bscan JobId 0: End of file 3 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 19:46 bscan JobId 0: End of file 4 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 19:53 bscan JobId 0: End of file 5 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 20:00 bscan JobId 0: End of file 6 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 20:07 bscan JobId 0: End of file 7 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 20:14 bscan JobId 0: End of file 8 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 20:21 bscan JobId 0: End of file 9 on device "DDS-4" (/dev/nst0),
>>> Volume "rick_temp-01"
>>> 04-Apr 20:28 bscan JobId 0: End of file 10 on device "DDS-4"
>>> (/dev/nst0), Volume "rick_temp-01"
>>> 04-Apr 20:36 bscan JobId 0: End of file 11 on device "DDS-4"
>>> (/dev/nst0), Volume "rick_temp-01"
>>> bscan: bscan.c:1018 Created FileSet record "Rick Home"
>>> bscan: bscan.c:1130 Updated Job termination record for JobId=1
>>> Level=Full TermStat=T
>>> bscan: bscan.c:1219 Created JobMedia record JobId 1, MediaId 1
>>> 04-Apr 20:40 bscan JobId 0: Error: block.c:995 Read error on fd=3 at
>>> file:blk 11:9518 on device "DDS-4" (/dev/nst0). ERR=Input/output error.
>>> Bacula status: file=11 block=9518
>>> Device status: ONLINE IM_REP_EN file=11 block=-1
>>> Records added or updated in the catalog:
>>> 1 Media
>>> 1 Pool
>>> 1 Job
>>> 57763 File
>>>
>>> Now I'm trying to restore. Using these restore settings...
>>>
>>> Select Storage resource (1-2): 2
>>> Run Restore job
>>> JobName: RestoreFiles
>>> Bootstrap: *None*
>>> Where: /bacula-restores
>>> Replace: always
>>> Client: rick-desktop-fd
>>> Storage: DDS-4
>>> JobId: 1002
>>> When: 2009-04-05 08:57:40
>>> Catalog: MyCatalog
>>> Priority: 10
>>> OK to run? (yes/mod/no): mod
>>>
>>>
>> Did you mark any files to restore?
>>
>>
>> John
>>
> John,
>
> Thank you for your reply. No, I did not mark any files for restore. I
> want everything on the tape restored to /bacula-restores. In a case like
> this, where do I mark the files to restore?
You should be getting a prompt for marking files. See "mark *" below.
Select the Client (1-26): 11
The defined FileSet resources are:
1: Full Set
2: basic backup
3: bast files
4: bast home
Select FileSet resource (1-4): 4
+--------+-------+----------+-------------+---------------------+----------------+
| jobid | level | jobfiles | jobbytes | starttime |
volumename |
+--------+-------+----------+-------------+---------------------+----------------+
| 26,295 | F | 17,722 | 459,708,116 | 2009-04-05 07:43:19 |
DLT7000-JYN234 |
| 26,315 | I | 0 | 0 | 2009-04-06 05:59:21 |
DLT7000-JYN236 |
+--------+-------+----------+-------------+---------------------+----------------+
You have selected the following JobIds: 26295,26315
Building directory tree for JobId 26295 ...
+++++++++++++++++++++++++++++++++++++++++++++
Building directory tree for JobId 26315 ...
2 Jobs, 15,987 files inserted into the tree.
You are now entering file selection mode where you add (mark) and
remove (unmark) files to be restored. No files are initially added, unless
you used the "all" keyword on the command line.
Enter "done" to leave this mode.
cwd is: /
$ mark *
17,722 files marked.
$ done
Bootstrap records written to /home/bacula/working/bacula-dir.restore.3.bsr
The job will require the following
Volume(s) Storage(s) SD Device(s)
===========================================================================
DLT7000-JYN234 DLT DLT
17,722 files selected to be restored.
Run Restore job
JobName: RestoreFiles
Bootstrap: /home/bacula/working/bacula-dir.restore.3.bsr
Where: /tmp/bacula-restores
Replace: always
FileSet: Full Set
Backup Client: bast-fd
Restore Client: bast-fd
Storage: DLT
When: 2009-04-06 18:33:22
Catalog: MyCatalog
Priority: 10
OK to run? (yes/mod/no):
- --
Dan Langille
BSDCan - The Technical BSD Conference : http://www.bsdcan.org/
PGCon - The PostgreSQL Conference: http://www.pgcon.org/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAknaPP4ACgkQCgsXFM/7nTy+4wCg1pmFMEvVniM/Qlwc1Y8VCSGx
45gAoMMBi9LT4UnnX0ZKybP/HdTno1R8
=xQWT
-----END PGP SIGNATURE-----
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
