Re: [Bacula-users] StorEdge C2 autochanger not working
2009-04-03 09:10:13
This is my configuration on Solaris 10:
Autochanger {
Name = SunSTK-C2
Device = Drive-0
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/scsi/changer/c3t4d1
}
Device {
Name = Drive-0
Description = "HP Ultrium LTO 3"
Media Type = LTO3
Archive Device = /dev/rmt/0bn
AutomaticMount = yes
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Drive Index = 0
#Offline On Unmount = no
#Hardware End of Medium = No
#Fast Forward Space File = No
#BSF at EOM = yes
#TWO EOF = yes
#Block Positioning = no
}
On Fri, 2009-04-03 at 14:06 +0200, b5b5b5b5 wrote:
> I have a problem running an AUTOCHANGER as a part of backup system.
>
> Tape is:
> Product Type: Tape Drive
> Vendor ID: 'HP'
> Product ID: 'Ultrium 3-SCSI'
> Revision: 'G36Z'
> and everything else looks like to work fine, except of the autochanger:
> Product Type: Medium Changer
> Vendor ID: 'QUANTUM'
> Product ID: 'UHDL'
> Revision: '0031'
> Both of them are part of one device: StorEdge C2 (from SUN
> Microsystems), model: SQL700 .
> Connected through: SCSI storage controller: LSI Logic / Symbios Logic
> 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
>
>
> After running the 'mtx -f /dev/sg3 status' i get this result:
> Storage Changer /dev/sg3:1 Drives, 16 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Unknown Storage Element Loaded)
> ...
> Storage Element 16:Full
>
>
> When executed this './mtx-changer /dev/sg3 load 1 /dev/nst0 0', i just
> received this response:
> Drive 0 Full (Storage Element 0 loaded)
>
>
> And finally when tryied this command (from the Bacula's manual chapter
> of testing the tape drive): 'btape -c /etc/bacula/bacula-sd.conf
> /dev/nst0' , i just get this ERROR msg:
> === Autochanger test ===
> 3301 Issuing autochanger "loaded" command.
> Nothing loaded in the drive. OK.
> 3303 Issuing autochanger "load 1 0" command.
> 3993 Bad autochanger command: /etc/bacula/scripts/mtx-changer /dev/sg3
> load 1 /dev/nst0 0
> 3993 result="Drive 0 Full (Storage Element 0 loaded)": ERR=Child exited
> with code 1
> You must correct this error or the Autochanger will not work.
>
> Could anybody give me some help please?
> Thanks in advance for any hint.
> Daniel
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|