I have a problem running an AUTOCHANGER as a part of backup system.

Tape is:
        Product Type: Tape Drive
        Vendor ID: 'HP'
        Product ID: 'Ultrium 3-SCSI'
        Revision: 'G36Z'
and everything else looks like to work fine, except of the autochanger:
        Product Type: Medium Changer
        Vendor ID: 'QUANTUM'
        Product ID: 'UHDL'
        Revision: '0031'
Both of them are part of one device:    StorEdge C2 (from SUN 
Microsystems), model: SQL700 .
Connected through:      SCSI storage controller: LSI Logic / Symbios Logic 
53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)


After running the 'mtx -f /dev/sg3 status' i get this result:
        Storage Changer /dev/sg3:1 Drives, 16 Slots ( 0 Import/Export )
        Data Transfer Element 0:Full (Unknown Storage Element Loaded)
        ...
        Storage Element 16:Full


When executed this './mtx-changer /dev/sg3 load 1 /dev/nst0 0', i just 
received this response:
        Drive 0 Full (Storage Element 0 loaded)


And finally when tryied this command (from the Bacula's manual chapter 
of testing the tape drive): 'btape -c /etc/bacula/bacula-sd.conf 
/dev/nst0' , i just get this ERROR msg:
        === Autochanger test ===
        3301 Issuing autochanger "loaded" command.
        Nothing loaded in the drive. OK.
        3303 Issuing autochanger "load 1 0" command.
        3993 Bad autochanger command: /etc/bacula/scripts/mtx-changer /dev/sg3 
load 1 /dev/nst0 0
        3993 result="Drive 0 Full (Storage Element 0 loaded)": ERR=Child exited 
with code 1
        You must correct this error or the Autochanger will not work.

Could anybody give me some help please?
Thanks in advance for any hint.
Daniel

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users