[Bacula-users] Troubleshooting question

I realize this is not directly Bacula, but does anyone know what might be my 
problem (settings / hardware issues) from the below SCSI errors?

scsi1:0:0:0: Attempting to abort cmd f4003500: 0x34 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x198 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x84] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0
qinstart = 27348 qinfifonext = 27348
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
  3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e
CDB 3 0 0 0 20 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
scsi1:0:0:0: Device is active, asserting ATN
Recovery code sleeping
(scsi1:A:0:0): Recovery SCB completes
Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 0x198
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x196 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0
qinstart = 27348 qinfifonext = 27348
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 3 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e
CDB 3 0 0 0 20 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
Recovery code awake
(scsi1:A:0:0): Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 
0x19a
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x198 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0
qinstart = 27349 qinfifonext = 27349
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 3 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x3, SINDEX = 0x1c0, DINDEX = 0x102
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e
CDB 0 0 0 0 0 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
Recovery code sleeping
(scsi1:A:0:0): Bus Device Reset Message Sent
Recovery SCB completes
scsi1: Bus Device Reset on A:0. 1 SCBs aborted
Recovery code awake
scsi1: Device reset returning 0x2002
st1: Block limits 1 - 16777215 bytes.
init_special_inode: bogus i_mode (0)
smb_retry: no connection process
smb_add_request: request [cae1ae80, mid=0] timed out!
smb_delete_inode: could not close inode 2
scsi1:0:0:0: Attempting to abort cmd e200c380: 0x5 0x0 0x0 0x0 0x0 0x0
scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x197 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x84] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 43726 qinfifonext = 43726
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
  2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e
CDB 3 0 0 0 20 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
scsi1:0:0:0: Device is active, asserting ATN
Recovery code sleeping
(scsi1:A:0:0): Recovery SCB completes
Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 0x19a
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x198 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 43726 qinfifonext = 43726
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 2 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e
CDB 3 0 0 0 20 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
Recovery code awake
(scsi1:A:0:0): Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 
0x19a
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x198 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0
qinstart = 43727 qinfifonext = 43727
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 2 3 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x2, SINDEX = 0x1c0, DINDEX = 0x102
scsi1: SCBPTR == 0x2, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e
CDB 0 0 0 0 0 0
STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
Recovery code sleeping
(scsi1:A:0:0): Bus Device Reset Message Sent
Recovery SCB completes
scsi1: Bus Device Reset on A:0. 1 SCBs aborted
Recovery code awake
scsi1: Device reset returning 0x2002
init_special_inode: bogus i_mode (0)
smb_retry: no connection process
smb_add_request: request [f72b9e80, mid=0] timed out!
smb_delete_inode: could not close inode 2
scsi1:0:0:0: Attempting to abort cmd d7639080: 0x34 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x2b Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19] SCSISIGI[0x44] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x40] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 62598 qinfifonext = 62598
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
  1 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 2 3 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x1
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x80]
SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc] SHADDR = 0x022ee112, SHCNT = 0xe
HADDR = 0x022ee100, HCNT = 0x20 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x1, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0xff01, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 1 1 0 0 0 0
STACK: 0x1f1 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
scsi1:0:0:0: Device is active, asserting ATN
Recovery code sleeping
(scsi1:A:0:0): Recovery SCB completes
Unexpected busfree in Data-in phase, 1 SCBs aborted, PRGMCNT == 0x1f5
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x1f3 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x40] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0]
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0
qinstart = 62598 qinfifonext = 62598
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 1 2 3 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:

scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x1
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8] DFSTATUS[0x81]
SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc] SHADDR = 0x022ee112, SHCNT = 0xe
HADDR = 0x022ee112, HCNT = 0xe CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc]
CCSCBCTL[0x4]
scsi1: REG0 == 0x1, SINDEX = 0x180, DINDEX = 0x102
scsi1: SCBPTR == 0x1, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e
CDB 3 0 0 80 8 d4
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:1:0): 0 waiting
DevQ(0:2:0): 0 waiting
DevQ(0:3:0): 0 waiting
Recovery code awake

------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users