> i'm having problems with my install most likely something missing on my part
> In bconsole I issue the "label barcodes" and this is what I get
> -----------------------------------------------
> *label barcodes
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> The defined Storage resources are:
>      1: File
>      2: Autochanger
> Select Storage resource (1-2): 2
> Connecting to Storage daemon Autochanger at 127.0.0.1:9103 ...
> Enter autochanger drive[0]:
> Connecting to Storage daemon Autochanger at 127.0.0.1:9103 ...
> 3306 Issuing autochanger "slots" command.
> Device "Autochanger" has 30 slots.
> Connecting to Storage daemon Autochanger at 127.0.0.1:9103 ...
> 3306 Issuing autochanger "list" command.
> The following Volumes will be labeled:
> Slot  Volume
> ==============
>    1  B27715
>   13  B27687
>   14  B27684
>   15  B27679
> Do you want to label these Volumes? (yes|no): yes
> Defined Pools:
>      1: Default
>      2: Scratch
> Select the Pool (1-2): 1
> Connecting to Storage daemon Autochanger at 127.0.0.1:9103 ...
> Sending label command for Volume "B27715" Slot 1 ...
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> 3304 Issuing autochanger "load slot 1, drive 0" command.
> 3305 Autochanger "load slot 1, drive 0", status is OK.
> 3920 Cannot label Volume because it is already labeled: "B27715"
> Label command failed for Volume B27715.
> Sending label command for Volume "B27687" Slot 13 ...
> 3307 Issuing autochanger "unload slot 1, drive 0" command.
> 3304 Issuing autochanger "load slot 13, drive 0" command.
> 3305 Autochanger "load slot 13, drive 0", status is OK.
> 3920 Cannot label Volume because it is already labeled: "B27687"
> Label command failed for Volume B27687.
> Sending label command for Volume "B27684" Slot 14 ...
> 3307 Issuing autochanger "unload slot 13, drive 0" command.
> 3304 Issuing autochanger "load slot 14, drive 0" command.
> 3305 Autochanger "load slot 14, drive 0", status is OK.
> 3920 Cannot label Volume because it is already labeled: "B27684"
> Label command failed for Volume B27684.
> Sending label command for Volume "B27679" Slot 15 ...
> 3307 Issuing autochanger "unload slot 14, drive 0" command.
> 3304 Issuing autochanger "load slot 15, drive 0" command.
> 3305 Autochanger "load slot 15, drive 0", status is OK.
> 3920 Cannot label Volume because it is already labeled: "B27679"
> Label command failed for Volume B27679.
> --------------------------------------------------
> after I run the "list volumes" and it shows no volumes in the catalog.
> what gives?
>
Were these tapes written during testing or a previous install of bacula?

John

------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users