preparing to set up a new backup system (Bacula 2.4.3)

Problem seems to be with mtx recognizing the second tray.

I have a Dell PV 124T (LTO-3 with 2, 8 tape trays)

# mtx -f /dev/sg4 status
  Storage Changer /dev/sg4:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag =
000001L3
      Storage Element 1:Empty
      Storage Element 2:Full :VolumeTag=000002L3
      Storage Element 3:Full :VolumeTag=000003L3
      Storage Element 4:Full :VolumeTag=000004L3
      Storage Element 5:Full :VolumeTag=000011L3
      Storage Element 6:Full :VolumeTag=000012L3
      Storage Element 7:Full :VolumeTag=000013L3
      Storage Element 8:Full :VolumeTag=000014L3

so it only shows the 8 slots in the left tray but not the 8 slots in the
right tray. I expected to be able to use both trays.

btape 'test' and 'autochanger' worked fine but before I start labeling
tapes, I really want to clear this up.

Maybe I'm just missing something obvious that someone can clarify for
me.

Craig


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users