Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup.
2008-07-08 17:39:03
I looked again at the output of the bls commands below and I realized that
although I specify Incremental backup volume, bls lists the files in Full
backup volume. The boot strap file is same for all disk backups,
could this be the problem?
Here is my job definition:
Job
{
Name = lidp11-BackupToDisk
Enabled = yes
Type = Backup
Client = lidp11-fd
FileSet = "lidp11 Disk set"
Schedule = BackupToDisk
Messages = Standard
Priority = 10
Pool = Default
Full Backup Pool = lidp11-FullBackupDiskPool
Incremental Backup Pool = lidp11-IncrBackupDiskPool
Write Bootstrap = "/backups/bootstrap/lidp11-FullBackupToDisk.bsr"
}
--- On Tue, 7/8/08, Hemant Shah <hjrrs AT yahoo DOT com> wrote:
> From: Hemant Shah <hjrrs AT yahoo DOT com>
> Subject: Re: [Bacula-users] Bacula says it is doing incremental backup but
> does full backup.
> To: bacula-users AT lists.sourceforge DOT net
> Date: Tuesday, July 8, 2008, 4:11 PM
> --- On Tue, 7/8/08, Ralf Gross
> <Ralf-Lists AT ralfgross DOT de> wrote:
>
> > From: Ralf Gross <Ralf-Lists AT ralfgross DOT de>
> > Subject: Re: [Bacula-users] Bacula says it is doing
> incremental backup but does full backup.
> > To: bacula-users AT lists.sourceforge DOT net
> > Date: Tuesday, July 8, 2008, 12:43 PM
> > Hemant Shah schrieb:
> > > > > I ran my first production backup of
> bacula
> > last
> > > > weekend. I did a
> > > > > full backup to tape, then full backup
> to
> > disk. Next
> > > > was
> > > > > incremental backup. Bacula said that
> it
> > was doing
> > > > incremental
> > > > > backup but it actually did a full
> backup.
> > I am
> > > > running bacula
> > > > > 2.4.0. Here are the e-mails I
> received.
> > > > > [...]
> > > > > As you can see the amount of data
> backups is
> > almost
> > > > the same (60GB).
> > > > > This was done over a long weekend, so
> very
> > few files
> > > > changed on this filesystem.
> > > >
> > > > Can you look at the timestamps of the backed
> up
> > files
> > > > (ctime, mtime)
> > > > on the client? Maybe ther is a job that
> touches
> > all the
> > > > files or
> > > > something similar.
> > >
> > > There is not other job (cron or otherwise) that
> would
> > touch all (2.5 million) files.
> >
> > Can you show us the the modification time of some file
> that
> > were backed up?
> >
> > Ralf
>
> Here is the output of bls command for Full and Incremental
> backups:
>
> [root@lidp11 ~]# bls -c /usr/local/etc/bacula-sd.conf -b
> /backups/bootstrap/lidp11-FullBackupToDisk.bsr -V
> Full-lidp11-2008-07-05-18:14:13 lidp11-File | head -25
> bls: match.c:249-0 add_fname_to_include prefix=0 gzip=0
> fname=/
> bls: butil.c:282 Using device: "lidp11-File" for
> reading.
> 08-Jul 16:05 bls JobId 0: Ready to read from volume
> "Full-lidp11-2008-07-05-18:14:13" on device
> "lidp11-File" (/backups/backupfiles/lidp11).
> 08-Jul 16:05 bls JobId 0: Forward spacing Volume
> "Full-lidp11-2008-07-05-18:14:13" to file:block
> 0:241.
> bls JobId 0: drwxr-xr-x 22 root root 4096
> 2008-06-13 13:24:21 /var/
> bls JobId 0: -rw-r--r-- 1 root root 0
> 2008-06-13 18:26:06 /.autofsck
> bls JobId 0: drwx------ 2 root root 16384
> 2008-06-13 12:30:01 /lost+found/
> bls JobId 0: drwxr-xr-x 11 root root 0
> 2008-06-13 18:25:52 /sys/
> bls JobId 0: drwxr-xr-x 4 root root 4096
> 2008-06-13 17:46:58 /baculaDB/
> bls JobId 0: lrwxrwxrwx 1 root root 20
> 2008-06-13 13:05:09 /lib64/ld-lsb-x86-64.so.3 ->
> ld-linux-x86-64.so.2
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 16:32:50 /lib64/libcom_err.so.2 ->
> libcom_err.so.2.1
> bls JobId 0: -rwxr-xr-x 1 root root 22152
> 2008-06-13 12:39:59 /lib64/libSegFault.so
> bls JobId 0: -rwxr-xr-x 1 root root 18672
> 2008-06-13 21:10:54 /lib64/libplc4.so
> bls JobId 0: -rwxr-xr-x 1 root root 169880
> 2008-06-13 21:09:40 /lib64/libexpat.so.1.5.2
> bls JobId 0: -rwxr-xr-x 1 root root 26752
> 2008-06-13 21:16:15 /lib64/libe2p.so.2.3
> bls JobId 0: lrwxrwxrwx 1 root root 14
> 2008-06-13 16:32:50 /lib64/libuuid.so.1 ->
> libuuid.so.1.2
> bls JobId 0: lrwxrwxrwx 1 root root 13
> 2008-06-13 12:39:59 /lib64/libnsl.so.1 -> libnsl-2.8.so
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 16:32:53 /lib64/libaudit.so.0 ->
> libaudit.so.0.0.0
> bls JobId 0: -rwxr-xr-x 1 root root 341368
> 2008-06-13 16:33:01 /lib64/libfreebl3.so
> bls JobId 0: -rwxr-xr-x 1 root root 55472
> 2008-06-13 21:15:45 /lib64/libcryptsetup.so.0.0.0
> bls JobId 0: -rwxr-xr-x 1 root root 11488
> 2008-06-13 16:36:52 /lib64/libpamc.so.0.81.0
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 12:39:59 /lib64/libpthread.so.0 ->
> libpthread-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 23208
> 2008-06-13 21:09:18 /lib64/libdl-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 42992
> 2008-06-13 12:39:59 /lib64/libnss_compat-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 112192
> 2008-06-13 21:09:18 /lib64/libselinux.so.1
>
>
>
> [root@lidp11 ~]# bls -c /usr/local/etc/bacula-sd.conf -b
> /backups/bootstrap/lidp11-FullBackupToDisk.bsr -V
> Incr-lidp11-2008-07-06-22:05:25 lidp11-File | head -25
> bls: match.c:249-0 add_fname_to_include prefix=0 gzip=0
> fname=/
> bls: butil.c:282 Using device: "lidp11-File" for
> reading.
> 08-Jul 16:06 bls JobId 0: Ready to read from volume
> "Full-lidp11-2008-07-05-18:14:13" on device
> "lidp11-File" (/backups/backupfiles/lidp11).
> 08-Jul 16:06 bls JobId 0: Forward spacing Volume
> "Full-lidp11-2008-07-05-18:14:13" to file:block
> 0:241.
> bls JobId 0: drwxr-xr-x 22 root root 4096
> 2008-06-13 13:24:21 /var/
> bls JobId 0: -rw-r--r-- 1 root root 0
> 2008-06-13 18:26:06 /.autofsck
> bls JobId 0: drwx------ 2 root root 16384
> 2008-06-13 12:30:01 /lost+found/
> bls JobId 0: drwxr-xr-x 11 root root 0
> 2008-06-13 18:25:52 /sys/
> bls JobId 0: drwxr-xr-x 4 root root 4096
> 2008-06-13 17:46:58 /baculaDB/
> bls JobId 0: lrwxrwxrwx 1 root root 20
> 2008-06-13 13:05:09 /lib64/ld-lsb-x86-64.so.3 ->
> ld-linux-x86-64.so.2
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 16:32:50 /lib64/libcom_err.so.2 ->
> libcom_err.so.2.1
> bls JobId 0: -rwxr-xr-x 1 root root 22152
> 2008-06-13 12:39:59 /lib64/libSegFault.so
> bls JobId 0: -rwxr-xr-x 1 root root 18672
> 2008-06-13 21:10:54 /lib64/libplc4.so
> bls JobId 0: -rwxr-xr-x 1 root root 169880
> 2008-06-13 21:09:40 /lib64/libexpat.so.1.5.2
> bls JobId 0: -rwxr-xr-x 1 root root 26752
> 2008-06-13 21:16:15 /lib64/libe2p.so.2.3
> bls JobId 0: lrwxrwxrwx 1 root root 14
> 2008-06-13 16:32:50 /lib64/libuuid.so.1 ->
> libuuid.so.1.2
> bls JobId 0: lrwxrwxrwx 1 root root 13
> 2008-06-13 12:39:59 /lib64/libnsl.so.1 -> libnsl-2.8.so
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 16:32:53 /lib64/libaudit.so.0 ->
> libaudit.so.0.0.0
> bls JobId 0: -rwxr-xr-x 1 root root 341368
> 2008-06-13 16:33:01 /lib64/libfreebl3.so
> bls JobId 0: -rwxr-xr-x 1 root root 55472
> 2008-06-13 21:15:45 /lib64/libcryptsetup.so.0.0.0
> bls JobId 0: -rwxr-xr-x 1 root root 11488
> 2008-06-13 16:36:52 /lib64/libpamc.so.0.81.0
> bls JobId 0: lrwxrwxrwx 1 root root 17
> 2008-06-13 12:39:59 /lib64/libpthread.so.0 ->
> libpthread-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 23208
> 2008-06-13 21:09:18 /lib64/libdl-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 42992
> 2008-06-13 12:39:59 /lib64/libnss_compat-2.8.so
> bls JobId 0: -rwxr-xr-x 1 root root 112192
> 2008-06-13 21:09:18 /lib64/libselinux.so.1
>
>
> Here is the "ls -l" output of 4 of the above
> files:
>
> [root@lidp11 ~]# ls -l /lib64/libSegFault.so
> /lib64/libplc4.so /lib64/libexpat.so.1.5.2
> /lib64/libe2p.so.2.3
> -rwxr-xr-x 1 root root 26752 2008-05-12 14:03
> /lib64/libe2p.so.2.3
> -rwxr-xr-x 1 root root 169880 2008-02-25 05:56
> /lib64/libexpat.so.1.5.2
> -rwxr-xr-x 1 root root 18672 2008-06-02 06:00
> /lib64/libplc4.so
> -rwxr-xr-x 1 root root 22152 2008-05-05 07:37
> /lib64/libSegFault.so
>
>
>
> >
> >
> -------------------------------------------------------------------------
> > Sponsored by: SourceForge.net Community Choice Awards:
> VOTE
> > NOW!
> > Studies have shown that voting for your favorite open
> > source project,
> > along with a healthy diet, reduces your potential for
> > chronic lameness
> > and boredom. Vote Now at
> > http://www.sourceforge.net/community/cca08
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users AT lists.sourceforge DOT net
> >
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
> Hemant Shah
> E-mail: hjrrs AT yahoo DOT com
>
>
>
>
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE
> NOW!
> Studies have shown that voting for your favorite open
> source project,
> along with a healthy diet, reduces your potential for
> chronic lameness
> and boredom. Vote Now at
> http://www.sourceforge.net/community/cca08
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
Hemant Shah
E-mail: hjrrs AT yahoo DOT com
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., (continued)
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Ralf Gross
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Ralf Gross
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Hemant Shah
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup.,
Hemant Shah <=
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Arno Lehmann
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Martin Simmons
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Hemant Shah
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., John Drescher
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Ralf Gross
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Arno Lehmann
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., Hemant Shah
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., John Drescher
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., John Drescher
- Re: [Bacula-users] Bacula says it is doing incremental backup but does full backup., John Drescher
|
|
|