Wait_For_Drive is broken for Ubuntu. I just submitted this as a bug.
http://bugs.bacula.org/view.php?id=1116
The problem is that mt returns ONLINE in Ubuntu, and mtx-changer is not
setting the ready string correctly. To work around it, comment out the
test for the file /etc/debian_version.
OS=`uname`
case ${OS} in
SunOS)
ready="No Additional Sense"
;;
FreeBSD)
ready="Current Driver State: at rest."
;;
Linux)
# if test -e /etc/debian_version ; then
# ready="drive status"
# else
ready="ONLINE"
# fi
;;
esac
Javier Rodriguez wrote:
> Lots of thanks, i was confused about function parameters and script
> parameters.
> I have set Wait_For_Drive() with 100 times of 10 seconds an i have
> launched the mount command to try it.
> These are the results:
>
> *mount
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> The defined Storage resources are:
> 1: File
> 2: Cinta
> Select Storage resource (1-2): 2
> Enter autochanger slot: 3
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> 3304 Issuing autochanger "load slot 3, drive 0" command.
> 3992 Bad autochanger "load slot 3, drive 0": ERR=Child died from
> signal 15: Termination.
> Results=Loading media from Storage Element 3 into drive 0...done
> Program killed by Bacula watchdog (timeout)
>
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result is Slot 3.
> 3001 Mounted Volume: A0000003
> 3001 Device "Driver1" (/dev/nst0) is mounted with Volume "A0000003"
>
> I don't understand why the errors messages now.
> I've been seeing other posts and I 've read that may be i should
> comment Wait_For_Drive() and use sleep X instead, but i think that my
> firsts problems will come again.
>
> Thanks in advance.
>
>
> --- El *mié, 2/7/08, Arno Lehmann /<al AT its-lehmann DOT de>/* escribió:
>
> De: Arno Lehmann <al AT its-lehmann DOT de>
> Asunto: Re: [Bacula-users] Please mount Volume "A0000003" or label
> a newone for...
> Para: Bacula-users AT lists.sourceforge DOT net
> Fecha: miércoles, 2 julio, 2008 9:37
>
> Hello,
>
> 02.07.2008 08:36, Javier Rodriguez
> wrote:
> > My OS is Ubuntu Hardy.
> > The output of 'mt -f /dev/nst0 status' is BOT ONLINE IM_REP_EN.
> > I increased the number of seconds for Wait_For_Drive() to 500.
>
> You might find it more useful (at least I do) to try the check, say,
> 30 times and sleep for 20 seconds. Gives a maximum wait time of ten
> minutes, but doesn't create new processes each second.
>
> > I 've seen an extrange thing. Seeing the Wait_For_Drive() funtion. In
> > the next line:
> > ...
> > if mt -f $1 status 2>&1 | grep "${ready}"
> > ...
> >
> > $1 references to the autoloader, not the tape. The tape has to be
> > /dev/nst0.
> > Is it a bug in the script or may be i'm too confused at this moment?
>
> I believe you're confusing the parameters of the script with the ones
> to this function alone.
>
> In the distributed version, wait_for_drive() is called with only one
> parameter, and that is
> the tape drive to check.
>
> > Anyway i just to change this line to
> > ...
> > if mt -f $4 status 2>&1 | grep "${ready}"
> > ...
>
> I guess this will break if you ever want to check anything else than
> /dev/tape (which, for *my* kernel and mt, is the default to use when
> not supplying a parameter). $4 will be empty in wait_for_drive...
>
> Arno
>
> > Thanks a lot.
> >
> >
> >
> > --- El *mar, 1/7/08, Brian Debelius /<bdebelius AT intelesyscorp DOT
> com>/*
>
> > escribió:
> >
> > De: Brian Debelius <bdebelius AT intelesyscorp DOT com>
> > Asunto: Re: [Bacula-users] Please mount Volume "A0000003" or
> label a
> > newone for...
> > Para: ungue79 AT yahoo DOT es
> > Fecha: martes, 1 julio, 2008 1:31
> >
> > I would do this.
> >
> > 0. What OS are you using?
> > 1. load a tape into the drive
> > 2. run `mt -f
> /dev/nst0 status` What does this output? Does it say
> > ONLINE? We need to know this to make sure the Wait_For_Drive()
> function
> > is working correctly.
> > 3. Instead of sleep, I would increase the wait time in the
> > Wait_For_Drive() function from 300 seconds to something higher. My
> > VXA-172 drive can take up to 20 minutes to load a tape.
> > You may want to
> > contact the manufacturer, and to determine the maximum load time for
> you
> > drive.
> >
> >
> >
> >
> > Javier Rodriguez wrote:
> > > Hello.
> > >
> > > To increase the wait time, i dit it by editing the mtx-changer
> script
> > > in section load:
> > >
> > > load)
> > > debug "Doing mtx -f $ctl load $slot $drive"
> > > ${MTX} -f $ctl load $slot $drive
> > >
> rtn=$?
> > > sleep 120
> > > exit $rtn
> > > ;;
> > > I think 120 seconds should be sufficient, isn't it?
> > >
> > > Here i show my mtx-changer script:
> > >
> > > #!/bin/sh
> > > #
> > > # Bacula interface to mtx autoloader
> > > #
> > > # $Id: mtx-changer.in 6712 2008-04-01 10:27:46Z kerns $
> > > #
> > > # If you set in your Device resource
> > > #
> > > # Changer Command = "path-to-this-script/mtx-changer %c %o
> %S %a
> > %d"
> > > # you will have the following input to this
> > script:
> > > #
> > > # So Bacula will always call with all the following arguments,
> even
> > > though
> > > # in come cases, not all are used.
> > > #
> > > # mtx-changer
> "changer-device" "command"
> > "slot" "archive-device"
> > > "drive-index"
> > > # $1 $2 $3 $4
> $5
> > > #
> > > # for example:
> > > #
> > > # mtx-changer /dev/sg0 load 1 /dev/nst0 0 (on a Linux system)
> > > #
> > > # will request to load the first cartidge into drive 0, where
> > > # the SCSI control channel is /dev/sg0, and the read/write
> device
> > > # is /dev/nst0.
> > > #
> > > # The commands are:
> > > # Command Function
> > > # unload unload a given slot
> > > # load load a given slot
> > > # loaded which slot is loaded?
> > > # list list Volume names (requires barcode
> > reader)
> >
> > # slots how many slots total?
> > > #
> > > # Slots are numbered from 1 ...
> > > # Drives are numbered from 0 ...
> > > #
> > > #
> > > # If you need to an offline, refer to the drive as $4
> > > # e.g. mt -f $4 offline
> > > #
> > > # Many changers need an offline after the unload. Also many
> > > # changers need a sleep 60 after the mtx load.
> > > #
> > > # N.B. If you change the script, take care to return either
> > > # the mtx exit code or a 0. If the script exits with a non-zero
> > > # exit code, Bacula will assume the request failed.
> > > #
> > >
> > > MTX=/usr/sbin/mtx
> > >
> > > # mt status output
> > > # SunOS No Additional Sense
> > > # FreeBSD Current Driver
> State: at rest.
> > > # Linux ONLINE
> > > # Note Debian has a different mt than the standard Linux
> version.
> > > # When no tape is in the drive it waits 2
> > minutes.
> > > # When a tape is in the drive, it prints user unfriendly
> output.
> > > #
> > >
> > > OS=`uname`
> > > case ${OS} in
> > > SunOS)
> > > ready="No Additional Sense"
> > > ;;
> > > FreeBSD)
> > > ready="Current Driver State: at rest."
> > > ;;
> > > Linux)
> > > if test -e /etc/debian_version ; then
> > > ready="drive status"
> > > else
> > > ready="ONLINE"
> > > fi
> > > ;;
> > > esac
> > >
> > > #
> > > # log whats done
> > >
> #
> > > # to turn on logging, uncomment the following line
> > > touch /var/lib/bacula/mtx.log
> > > #
> > > dbgfile="/var/lib/bacula/mtx.log"
> > > debug() {
> > > if test -f $dbgfile; then
> > > echo "`date +\"%Y%m%d-%H:%M:%S\"`
> $*"
> > >> $dbgfile
> > > fi
> > > }
> > >
> > >
> > > #
> > > # Create a temporary file
> > > #
> > > make_temp_file() {
> > >
> > TMPFILE=`mktemp /var/lib/bacula/mtx.XXXXXXXXXX`
> > > if test x${TMPFILE} = x; then
> > > TMPFILE="/var/lib/bacula/mtx.$$"
> > > if test -f ${TMPFILE}; then
> > > echo "Temp file security problem on:
> ${TMPFILE}"
> > > exit 1
> > > fi
> > > fi
> > > }
> >
> >
> > > #
> > > # The purpose of this function to wait a maximum
> > > # time for the drive. It will
> > > # return as soon as the drive is ready, or after
> > > # waiting a maximum of 300 seconds.
> > > # Note, this is very system dependent, so if you are
> > > # not running on Linux, you will probably need to
> > > # re-write it, or at least change the grep target.
> > > # We've attempted to get the appropriate OS grep targets
> > > # in the code at the top of this script.
> > > #
> > > wait_for_drive() {
> > > i=0
> > > while [ $i -le 300 ]; do # Wait max 300 seconds
> > > if mt -f $1 status
> > 2>&1 | grep "${ready}"
> > >/dev/null 2>&1; then
> > > break
> > > fi
> > > debug
> "Device $1 - not ready, retrying..."
> > > sleep 1
> > > i=`expr $i + 1`
> > > done
> > > }
> > > # check parameter count on commandline
> > > #
> > > check_parm_count() {
> > > pCount=$1
> > > pCountNeed=$2
> > > if test $pCount -lt $pCountNeed; then
> > > echo "usage: mtx-changer ctl-device command [slot
> > > archive-device drive-index]"
> > > echo " Insufficient number of arguments
> given."
> > > if test $pCount -lt 2; then
> > > echo " Mimimum usage is first two arguments
> ..."
> > > else
> > > echo " Command expected $pCountNeed
> arguments"
> > > fi
> > > exit 1
> > > fi
> > > }
> > >
> > > #
> Check for special cases where only 2 arguments are needed,
> > > # all others are a minimum of
> > 5
> > > #
> > > case $2 in
> > > list)
> > > check_parm_count $# 2
> > > ;;
> > > slots)
> > > check_parm_count $# 2
> > > ;;
> > > *)
> > > check_parm_count $# 5
> > > ;;
> > > esac
> > >
> > >
> > > # Setup arguments
> > > ctl=$1
> > > cmd="$2"
> > > slot=$3
> > > device=$4
> > > drive=$5
> > >
> > > debug "Parms: $ctl $cmd $slot $device $drive"
> > > case $cmd in
> > > unload)
> > > debug "Doing mtx -f $ctl unload $slot $drive"
> > > #
> > > # enable the following line if
> you need to eject the cartridge
> > > # mt -f $device offline
> > > # sleep 10
> > > ${MTX} -f $ctl unload $slot $drive
> > > ;;
> > >
> > > load)
> > > debug "Doing mtx -f $ctl load $slot $drive"
> > > ${MTX} -f $ctl load $slot $drive
> > > rtn=$?
> > > #
> > > # Increase the sleep time if you have
> > a slow device
> > > # or remove the sleep and add the following:
> > > sleep 120
> > > # wait_for_drive $device
> > > exit $rtn
> > > ;;
> > >
> > > list)
> > > debug "Doing mtx -f $ctl -- to list volumes"
> > > make_temp_file
> > > # Enable the following if you are using barcodes and need an
> inventory
> > > # ${MTX} -f
> $ctl inventory
> > > ${MTX} -f $ctl status >${TMPFILE}
> > > rtn=$?
> > > cat ${TMPFILE} | grep " Storage Element
> [0-9]*:.*Full" |
> > awk
> > > "{print \$3 \$4}" | sed "s/Full
> > *\(:VolumeTag=\)*//"
> > > #
> > > # If you have a VXA PacketLoader and the above does not work, try
> > > # turning it off and enabling the following line.
> > > # cat ${TMPFILE} | grep " *Storage Element
> [0-9]*:.*Full" |
> > sed
> > > "s/ Storage Element //" | sed "s/Full
> :VolumeTag=//"
> > > #
> > > cat ${TMPFILE} | grep "^Data Transfer
> > Element [0-9]*:Full
> > > (Storage Element [0-9]" | awk '{printf
> > "%s:%s\n",$7,$10}'
> > > rm -f ${TMPFILE} >/dev/null 2>&1
> > > exit $rtn
> > > ;;
> >
> >
> > > loaded)
> > > debug "Doing mtx -f $ctl $drive -- to find what is
> loaded"
> > > make_temp_file
> > > ${MTX} -f $ctl status >${TMPFILE}
> > > rtn=$?
> > > cat ${TMPFILE} | grep "^Data Transfer Element
> $drive:Full"
> > | awk
> > > "{print \$7}"
> > > cat ${TMPFILE} | grep "^Data Transfer Element
> > $drive:Empty" |
> > > awk "{print 0}"
> > > rm -f ${TMPFILE} >/dev/null 2>&1
> > > exit $rtn
> > > ;;
> > >
> > > slots)
> > > debug "Doing mtx -f $ctl -- to get count of
> slots"
> > > ${MTX} -f $ctl status | grep " *Storage Changer"
> | awk
> > "{print \$5}"
> > > ;;
> > > esac
> > >
> > >
> > > My
> problems are becoming very usuals and
> > several days i've got to
> > > operate manually.
> > > Thanks for your help.
> > >
> > >
> > > --- El *vie, 20/6/08, Gregg A. Discenza
> /<gdiscenza AT carana DOT com>/*
> > > escribió:
> > >
> > > De: Gregg A. Discenza <gdiscenza AT carana DOT com>
> > > Asunto: Re: [Bacula-users] Please mount Volume
> "A0000003" or
> > label
> > > a newone for...
> > > Para: Bacula-users AT lists.sourceforge DOT net
> > > Fecha: viernes, 20 junio, 2008 2:01
> > >
> > >
> > > I saw this error every time I tried to use my newly installed
> > > autoloader.
> > >
> > > The salient error is not "Please mount....." but
> instead
> > "Error:
> > >
> block.c...."
> > >
> > > You need to increase the wait time between issuing a changer
> > > command and bacula trying to mount the tape drive.
> > >
> > > HTH
> > >
> > > -Gregg
> > >
> > >
> > -----Original Message-----
> > > *From:* bacula-users-bounces AT lists.sourceforge DOT net
> > > [mailto:bacula-users-bounces AT lists.sourceforge DOT
> net]*On
> Behalf
> > > Of *Javier Rodriguez
> > > *Sent:* Friday, June 20, 2008 2:29 AM
> > > *To:* drescherjm AT gmail DOT com;
> Bacula-users AT lists.sourceforge DOT net
> > > *Subject:* Re: [Bacula-users] Please mount Volume
> > "A0000003"
> > > or label a newone for...
> > >
> > > Mmmm. The problem came again, but now
> with another tape.
> Here
> > > I dump the messages shown by bacula:
> > >
> > > 19-jun 22:00 servfich-dir JobId 53: Start Backup JobId
> 53,
> > > Job=Backup_de_Trabajo_Diario.2008-06-19_22.00.39
> > > 19-jun 22:00 servfich-dir JobId 53: There are no more
> Jobs
> > > associated with Volume "A0000004". Marking it
> purged.
> > > 19-jun 22:00 servfich-dir JobId 53: All records pruned
> > from
> > > Volume "A0000004"; marking it
> "Purged"
> > > 19-jun 22:00 servfich-dir JobId 53: Recycled volume
> > "A0000004"
> > > 19-jun 22:00 servfich-sd JobId 53: 3307 Issuing
> autochanger
> > > "unload slot 3, drive 0" command.
> > > 19-jun 22:05 servfich-sd JobId 53: 3995 Bad autochanger
> > > "unload slot
> 3, drive 0": ERR=Child died from
> signal 15:
> > > Termination
> > > Results=Unloading drive 0 into Storage Element 3...done
> > > Program killed by Bacula watchdog (timeout)
> > > 19-jun 22:05 servfich-dir JobId 53: Using Device
> > "Driver1"
> > > 19-jun 22:05 servfich-sd JobId 53: 3301 Issuing
> autochanger
> > > "loaded? drive 0" command.
> > > 19-jun 22:05 servfich-sd JobId 53: 3302 Autochanger
> "loaded?
> > > drive 0", result is Slot 3.
> > > 19-jun 22:05 servfich-sd JobId 53: 3307 Issuing
> > autochanger
> > > "unload slot 3, drive 0" command.
> > > 19-jun 22:06 servfich-sd JobId 53: 3995 Bad autochanger
> > > "unload slot 3, drive 0": ERR=Child exited with
> code 1
> > >
> Results=Unloading drive 0 into Storage Element
> 3...Destination
> > > Element Address 3 is Already Full
> > > 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing
> autochanger
> > > "loaded? drive 0" command.
> > > 19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger
> "loaded?
> > > drive 0", result: nothing loaded.
> > > 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing
> autochanger
> > > "loaded? drive 0" command.
> > > 19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger
> "loaded?
> > > drive 0", result: nothing loaded.
> > > 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing
> autochanger
> > > "loaded? drive 0" command.
> > > 19-jun
> > 22:06 servfich-sd JobId 53: 3302 Autochanger "loaded?
> > >
> drive 0", result: nothing loaded.
> > > 19-jun 22:06 servfich-sd JobId 53: 3304 Issuing
> autochanger
> > > "load slot 4, drive 0" command.
> > > 19-jun 22:08 servfich-sd JobId 53: 3305 Autochanger
> "load
> > slot
> > > 4, drive 0", status is OK.
> > > 19-jun 22:08 servfich-sd JobId 53: 3301 Issuing
> autochanger
> > > "loaded? drive 0" command.
> > > 19-jun 22:08 servfich-sd JobId 53: 3302 Autochanger
> "loaded?
> > > drive 0", result is Slot 4.
> > > 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995
> Read
> > > error on fd=6 at file:blk 0:0 on device
> "Driver1"
> > (/dev/nst0).
> > > ERR=Input/output error.
> > > 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995
> Read
> > >
> error on fd=6 at file:blk 0:0 on device
> "Driver1"
> > (/dev/nst0).
> > >
> > ERR=Input/output error.
> > > 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995
> Read
> > > error on fd=6 at file:blk 0:0 on device
> "Driver1"
> > (/dev/nst0).
> > > ERR=Input/output error.
> > > 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995
> Read
> > > error on fd=6 at file:blk 0:0 on device
> "Driver1"
> > (/dev/nst0).
> > > ERR=Input/output error.
> > > 19-jun 22:08 servfich-sd JobId 53: Please mount Volume
> > > "A0000004" or label a new one for:
> > > Job:
> Backup_de_Trabajo_Diario.2008-06-19_22.00.39
> > > Storage: "Driver1" (/dev/nst0)
> > > Pool:
> JuevesPool
> > > Media type: VXA-X23
> > > 19-jun 23:08 servfich-sd JobId 53: Please mount Volume
> > > "A0000004" or label a new one for:
> > > Job:
> > Backup_de_Trabajo_Diario.2008-06-19_22.00.39
> > > Storage: "Driver1" (/dev/nst0)
> > > Pool: JuevesPool
> > > Media type: VXA-X23
> > > 20-jun 01:08 servfich-sd JobId 53: Please mount Volume
> > > "A0000004" or label a new one for:
> > > Job:
> Backup_de_Trabajo_Diario.2008-06-19_22.00.39
> > > Storage: "Driver1" (/dev/nst0)
> > > Pool: JuevesPool
> > > Media type: VXA-X23
> > > 20-jun 05:08 servfich-sd JobId 53: Please mount Volume
> >
> > "A0000004" or label a new one for:
> > > Job:
> Backup_de_Trabajo_Diario.2008-06-19_22.00.39
> > > Storage: "Driver1" (/dev/nst0)
> > > Pool: JuevesPool
> > > Media type: VXA-X23
> > >
> > > I don't know why is it happening. I need some help of
> you.
> > >
> > Thanks a lot.
> > > --- El *vie, 13/6/08, Javier Rodriguez
> /<ungue79 AT yahoo DOT es>/*
> > > escribió:
> > >
> > > De: Javier Rodriguez <ungue79 AT yahoo DOT es>
> > > Asunto: Re: [Bacula-users] Please mount Volume
> > "A0000003"
> > > or label a new one for...
> > > Para: "John Drescher"
> <drescherjm AT gmail DOT com>
> > > Fecha:
> viernes, 13 junio, 2008 9:16
> > >
> > > I know that, but this tape has been written once.
> > > Furthermore, i only had to type in bconcole unmount
> and
> > > after mount with the slot 3 which is where A0000003
> is in,
> > > and everything ran fine.
> > >
> > > Anyway, i'll see if next week i have the same
> problem with
> > > that tape, If i have, then may be the tape
> doesn't work
> > > very well.
> > >
> > > Thanks a
> > lot.
> > >
> > > --- El *jue, 12/6/08, John Drescher
> > > /<drescherjm AT gmail DOT com>/* escribió:
> > >
> > > De: John Drescher <drescherjm AT gmail DOT com>
> > > Asunto: Re:
> [Bacula-users] Please mount Volume
> > > "A0000003" or label a new one for...
> > > Para: ungue79 AT yahoo DOT es, "baculausers"
> > > <Bacula-users AT lists.sourceforge DOT net>
> > > Fecha: jueves, 12 junio, 2008 2:56
> > >
> > > > 12-jun 08:07 servfich-sd JobId 47: Error:
> block.c:995
> > Read
> > > error on fd=6 at
> > > > file:blk 0:0 on device "Driver1"
> > (/dev/nst0). ERR=Input/output
> > > error.
> > > > 12-jun 08:07 servfich-sd JobId 47: Please
> mount
> > Volume
> > > "A0000003" or label a
> > > > new one
> > for:
> > > >
> > > You should not
> see this error on a tape that has
> been
> > written to it
> > > unless the tape or
> > > the drive is bad. If it is a never used tape
> this
> > > is a normal error because the drive will not let
> you read
> > an unwritten
> > > tape.
> > >
> > > John
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > Enviado desde Correo Yahoo!
> > >
> >
>
> <http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http://us.rd.yahoo.com/evt=52431/*http://es.docs.yahoo.com/mail/overview/index.html>
> > > La bandeja de entrada más inteligente.
> > >
> > >
> > >
>
> >
> ------------------------------------------------------------------------
> > >
> > > Enviado desde Correo
> > Yahoo!
> > >
> >
>
> <http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http://us.rd.yahoo.com/evt=52431/*http://es.docs.yahoo.com/mail/overview/index.html>
> > > La bandeja de entrada más inteligente.
> > >
> > >
> >
> -------------------------------------------------------------------------
> > > Check out the new SourceForge.net Marketplace.
> > > It's the best place to buy or sell services for
> > > just about anything Open Source.
> > > http://sourceforge.net/services/buy/index.php
> > >
> > > _______________________________________________
> > > Bacula-users mailing list
> > >
> Bacula-users AT lists.sourceforge DOT net
> > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > Enviado desde Correo Yahoo!
> >
> > >
> >
>
> <http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http://us.rd.yahoo.com/evt=52431/*http://es.docs.yahoo.com/mail/overview/index.html>
> > > La bandeja de entrada más inteligente.
> > >
> ------------------------------------------------------------------------
> > >
> > >
> -------------------------------------------------------------------------
> > > Check out the new SourceForge.net Marketplace.
> > > It's the best place to buy or sell services for
> > > just about anything Open Source.
> > >
> http://sourceforge.net/services/buy/index.php
> > >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Bacula-users mailing list
> > > Bacula-users AT lists.sourceforge DOT net
> > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > >
> >
> >
> >
> > Enviado desde Correo Yahoo!
> >
>
> <http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http://us.rd.yahoo.com/evt=52431/*http://es.docs.yahoo.com/mail/overview/index.html>
> > La bandeja de entrada más inteligente.
> >
> >
> > ------------------------------------------------------------------------
> >
> >
> -------------------------------------------------------------------------
> > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> > Studies have shown
> that voting for your favorite open source project,
> > along with a healthy diet, reduces your potential for chronic lameness
> > and boredom. Vote Now at http://www.sourceforge.net/community/cca08
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users AT lists.sourceforge DOT net
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
>
> --
> Arno Lehmann
> IT-Service Lehmann
> www.its-lehmann.de
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> Studies have shown that voting for your favorite open source project,
> along with a healthy diet, reduces your potential for chronic lameness
> and boredom. Vote Now at
> http://www.sourceforge.net/community/cca08
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
> ------------------------------------------------------------------------
>
> Enviado desde Correo Yahoo!
> <http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http://us.rd.yahoo.com/evt=52431/*http://es.docs.yahoo.com/mail/overview/index.html>
> La bandeja de entrada más inteligente.
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> Studies have shown that voting for your favorite open source project,
> along with a healthy diet, reduces your potential for chronic lameness
> and boredom. Vote Now at http://www.sourceforge.net/community/cca08
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|