Bacula-users

Re: [Bacula-users] Malformed data header from FD

2008-06-30 06:43:52
Subject: Re: [Bacula-users] Malformed data header from FD
From: Silver Salonen <silver AT ultrasoft DOT ee>
To: bacula-users AT lists.sourceforge DOT net
Date: Mon, 30 Jun 2008 13:43:41 +0300
On Monday 30 June 2008 13:38, Arno Lehmann wrote:
> Hi,
> 
> 30.06.2008 12:20, Silver Salonen wrote:
> > Hi.
> > 
> > I use Bacula 2.4.0 as server and I'm trying to backup Windows XP. The 
problem 
> > is that even though job starts running fine, it gets stuck at some point 
and 
> > then SD reports error a few minutes later. At first I thought it's always 
> > about the same file, but it's not - it gets stuck on different files.
> > 
> > The error is:
> > =====
> > 30-Jun 13:00 mybac-dir JobId 68: Max Volume jobs exceeded. Marking 
> > Volume "lett1-full-0061" as Used.
> > 30-Jun 13:01 mybac-sd JobId 68: Fatal error: append.c:180 Malformed data 
> > header from FD: 479ÿ
> > 30-Jun 13:01 mybac-sd JobId 68: Job write elapsed time = 00:00:10, 
Transfer 
> > rate = 5.650 M bytes/second
> > 30-Jun 13:01 mybac-lett1-fd JobId 68: Fatal 
error: ../../filed/backup.c:892 
> > Network send error to SD. ERR=Input/output error
> > 30-Jun 13:01 mybac-lett1-fd JobId 68: Error: ../../lib/bsock.c:306 Write 
error 
> > sending 6548 bytes to Storage daemon:192.168.21.1:9103: ERR=Input/output 
> > error
> > =====
> > 
> > I tried backup with and without VSS, with 2.4.0 and with 2.2.8, but it's 
> > always the same.
> > Backing up some other folder works fine though..
> > 
> > Any ideas what could cause that?
> 
> What FD version do you run on windows?

Ah, sorry, 2.4.0 and 2.2.8 were about Windows FD :)

> Does the estimate command work correctly?

I just tried it and yes, it estimates 4 times more data than backups have 
managed to send.

> Any firewalls between the FD and SD?

PF on server-side, but it's configured to pass everything on that (inner) 
interface.

> Which network card and driver on windows?

Don't know and cannot check at the moment :(

--
Silver

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>