Bacula-users
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Bacula-users] bacula 2.2.6 incompatable with 2.4.0??

2008-06-14 16:16:44
Subject: Re: [Bacula-users] bacula 2.2.6 incompatable with 2.4.0??
From: Arno Lehmann <al AT its-lehmann DOT de>
To: bacula-users AT lists.sourceforge DOT net
Date: Sat, 14 Jun 2008 22:15:46 +0200 
Hi,

14.06.2008 21:23, RYAN vAN GINNEKEN wrote:
> I have a bacula 2.2.6 on freebsd machine and have on several attempts 
> tried to do a restore to 2.4.0 and get failures.  Are these version 
> incompatable?? I might be able to upgrade the version on the freebsd 
> machine but i am in recovery mode here and cannot afford to lose the 
> data contain in bacula 2.2.6
>  
> here are the errors
>  
>  
>  
> *14-Jun 19:10 rescue-fd JobId 1175: Error: GZIP data stream not 
> supported on this Client.

This looks like your client is compiled without suppression support.

the command 'ldd /path/to/bacula-fd' should tell you if libz is needed 
by it. If it isn't, you will have to recompile the FD with compression 
support.

Otherwise, I don't know what's wrong.

Arno

> 14-Jun: is an invalid command.
> 14-Jun 13:01 miako-sd JobId 1175: Reposition from (file:block) 
> 3:138159139 to 3:1774098474
> 14-Jun 19:10 rescue-fd JobId 1175: Error: 8 non-supported data streams 
> and 0 non-supported attrib streams ignored.
> 14-Jun 13:02 miako-dir JobId 1175: Error: Bacula miako-dir 2.2.6 
> (10Nov07): 14-Jun-2008 13:01:59
>  
> *14-Jun 13:01 miako-sd JobId 1175: Reposition from (file:block) 
> 3:138159139 to 3:1774098474
> 14-Jun: is an invalid command.
> *14-Jun 19:10 rescue-fd JobId 1175: Error: 8 non-supported data streams 
> and 0 non-supported attrib streams ignored.
> 14-Jun: is an invalid command.
> *14-Jun 13:02 miako-dir JobId 1175: Error: Bacula miako-dir 2.2.6 
> (10Nov07): 14-Jun-2008 13:01:59
> 14-Jun: is an invalid command.
>  
> THIS IS A DEBUG OF THE CLIENT
>  
> yVolume
> rescue-fd: job.c:1736-0 >stored: read open session = DummyVolume 38 
> 1213057385 0 0 0 0
> rescue-fd: job.c:1742-0 bfiled<stored: 3000 OK open ticket = 38
> rescue-fd: job.c:1747-0 bfiled: got Ticket=38
> rescue-fd: job.c:1830-0 send_bootstrap_file: 
> /var/lib/bacula/rescue-fd.Restore-canmail.org.2008-06-14_13.00.26.2.bootstrap
> rescue-fd: job.c:1804-0 3000 OK bootstrap
> rescue-fd: job.c:1761-0 >stored: read data 38
> rescue-fd: job.c:1804-0 3000 OK data
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=B set=R
> rescue-fd: jcr.c:623-0 OnExit JobStatus=R set=R
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=R set=R
> rescue-fd: jcr.c:623-0 OnExit JobStatus=R set=R
> rescue-fd: bsock.c:618-0 set network buffer size=65536
> rescue-fd: bnet.c:667-0 who=client host=192.168.1.100 
> <http://192.168.1.100> port=36387
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=rescue-fd: jcr.c:623-0 OnExit 
> JobStatus=C set=C
> rescue-fd: find.c:81-0 init_find_files ff=80a9d90
> rescue-fd: job.c:233-0 <dird: Hello Director miako-dir calling
> rescue-fd: job.c:249-0 Executing Hello command.
> rescue-fd: job.c:359-0 Calling Authenticate
> rescue-fd: watchdog.c:193-0 Registered watchdog 80a9fa8, interval 600 
> one shot
> rescue-fd: btimers.c:179-0 Start bsock timer 80aa930 tid=b73fabb0 for 
> 600 secs at 1213470621
> rescue-fd: cram-md5.c:73-0 send: auth cram-md5 
> <825860972.1213470621@rescue-fd <mailto:825860972.1213470621@rescue-fd>> 
> ssl=0
> rescue-fd: cram-md5.c:133-0 cram-get received: auth cram-md5 
> <1469742137.1213448494@miako-dir 
> <mailto:1469742137.1213448494@miako-dir>> ssl=0
> rescue-fd: cram-md5.c:152-0 sending resp to challenge: 
> q4+v20p/FE+NR/UXg//hOB
> rescue-fd: btimers.c:193-0 Stop bsock timer 80aa930 tid=b73fabb0 at 
> 1213470621.
> rescue-fd: watchdog.c:213-0 Unregistered watchdog 80a9fa8
> rescue-fd: job.c:363-0 OK Authenticate
> rescue-fd: job.c:233-0 <dird: JobId=0 Job=-Console-.2008-06-14_12.48.23 
> SDid=0 SDtime=0 Authorization=dummy
> rescue-fd: job.c:249-0 Executing JobId= command.
> rescue-fd: job.c:457-0 JobId=0 Auth=dummy
> rescue-fd: job.c:233-0 <dird: statusrescue-fd: job.c:249-0 Executing 
> status command.
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: status.c:143-0 Begin status jcr loop.
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: mem_pool.c:568-0 max_size=512
> rescue-fd: runscript.c:103-0 runscript: running all RUNSCRIPT object 
> (ClientAfterJob) JobStatus=C
> rescue-fd: job.c:343-0 Calling term_find_files
> rescue-fd: job.c:346-0 Done with term_find_files
> rescue-fd: runscript.c:252-0 runscript: freeing all RUNSCRIPTS object
> rescue-fd: message.c:416-0 Close_msg jcr=80bb8b8
> rescue-fd: message.c:416-0 Close_msg jcr=0
> rescue-fd: message.c:428-0 ===Begin close msg resource at 80a85e0
> rescue-fd: message.c:512-0 Done walking message chain.
> rescue-fd: message.c:519-0 ===End close msg resource
> rescue-fd: mem_pool.c:377-0 garbage collect memory pool
> rescue-fd: job.c:348-0 Done with free_jcr
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426049 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=106 extract=0
> rescue-fd: attr.c:77-0 Attr: 426049 3 /home/c0mputerking/seagate/stlog.txt
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426049 type=3
> rescue-fd: attr.c:116-0 unpack_attr FI=426049 Type=3 
> fname=/home/c0mputerking/seagate/stlog.txt attr=P0A G1YAO IGk B A A A OT 
> BAA I BIQnQJ BG9YZY BHcbTo A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/stlog.txt
> attrib=P0A G1YAO IGk B A A A OT BAA I BIQnQJ BG9YZY BHcbTo A A E
> attribsEx=
> rescue-fd: message.c:1083-0 Enter Jmsg type=4
> rescue-fd: message.c:609-0 Enter dispatch_msg type=4 msg=rescue-fd JobId 
> 1175: Error: GZIP data stream not supported on this Client.
> rescue-fd: message.c:781-0 DIRECTOR for following msg: rescue-fd JobId 
> 1175: Error: GZIP data stream not supported on this Client.
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426049 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=343 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426049 Stream=3, MD5 
> digest.
> rescue-fd: restore.c:272-0 Got stream: MD5 digest len=16 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426050 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=108 extract=0
> rescue-fd: attr.c:77-0 Attr: 426050 3 /home/c0mputerking/seagate/sthelp.txt
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426050 type=3
> rescue-fd: attr.c:116-0 unpack_attr FI=426050 Type=3 
> fname=/home/c0mputerking/seagate/sthelp.txt attr=P0A G1YAN IEk B A A A 
> L+w BAA Bg BIQnQJ 7ny2h BHcbTo A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/sthelp.txt
> attrib=P0A G1YAN IEk B A A A L+w BAA Bg BIQnQJ 7ny2h BHcbTo A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426050 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=16451 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426050 Stream=3, MD5 
> digest.
> rescue-fd: restore.c:272-0 Got stream: MD5 digest len=16 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426051 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=108 extract=0
> rescue-fd: attr.c:77-0 Attr: 426051 3 /home/c0mputerking/seagate/UcliEvt.log
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426051 type=3
> rescue-fd: attr.c:116-0 unpack_attr FI=426051 Type=3 
> fname=/home/c0mputerking/seagate/UcliEvt.log attr=P0A G1YA0 IGk B A A A 
> Ok BAA I BIQnQJ BHG+6S BHcbT1 A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/UcliEvt.log
> attrib=P0A G1YA0 IGk B A A A Ok BAA I BIQnQJ BHG+6S BHcbT1 A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426051 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=198 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426051 Stream=3, MD5 
> digest.
> rescue-fd: restore.c:272-0 Got stream: MD5 digest len=16 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426052 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=100 extract=0
> rescue-fd: attr.c:77-0 Attr: 426052 3 /home/c0mputerking/seagate/st
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426052 type=3
> rescue-fd: attr.c:116-0 unpack_attr FI=426052 Type=3 
> fname=/home/c0mputerking/seagate/st attr=P0A G1YAM IHt B A A A r+1 BAA 
> Fo BIQnQJ 7ny2d BHcbTo A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/st
> attrib=P0A G1YAM IHt B A A A r+1 BAA Fo BIQnQJ 7ny2d BHcbTo A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426052 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=22967 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426052 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=23616 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426052 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=16970 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426052 Stream=3, MD5 
> digest.
> rescue-fd: restore.c:272-0 Got stream: MD5 digest len=16 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426053 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=108 extract=0
> rescue-fd: attr.c:77-0 Attr: 426053 3 /home/c0mputerking/seagate/UcliErr.log
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426053 type=3
> rescue-fd: attr.c:116-0 unpack_attr FI=426053 Type=3 
> fname=/home/c0mputerking/seagate/UcliErr.log attr=P0A G1YBK IGk B A A A 
> W4 BAA I BIQnQJ BHG+6T BHcbT1 A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/UcliErr.log
> attrib=P0A G1YBK IGk B A A A W4 BAA I BIQnQJ BHG+6T BHcbT1 A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426053 Stream=4, GZIP 
> data.
> rescue-fd: restore.c:272-0 Got stream: GZIP data len=226 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426053 Stream=3, MD5 
> digest.
> rescue-fd: restore.c:272-0 Got stream: MD5 digest len=16 extract=0
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426054 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=98 extract=0
> rescue-fd: attr.c:77-0 Attr: 426054 5 /home/c0mputerking/seagate/
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426054 type=5
> rescue-fd: attr.c:116-0 unpack_attr FI=426054 Type=5 
> fname=/home/c0mputerking/seagate/ attr=P0A G1YAQ EHt C A A A BAA BAA I 
> BIQnQJ BHcbT1 BHcbT1 A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/seagate/
> attrib=P0A G1YAQ EHt C A A A BAA BAA I BIQnQJ BHcbT1 BHcbT1 A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=426119 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=92 extract=0
> rescue-fd: attr.c:77-0 Attr: 426119 5 /home/c0mputerking/
> rescue-fd: attr.c:83-0 Got Attr: FilInx=426119 type=5
> rescue-fd: attr.c:116-0 unpack_attr FI=426119 Type=5 
> fname=/home/c0mputerking/ attr=P0A G1YAC EHA M H0 H0 A BAA BAA I BIRDl3 
> BIPJC1 BIPJC1 A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/c0mputerking/
> attrib=P0A G1YAC EHA M H0 H0 A BAA BAA I BIRDl3 BIPJC1 BIPJC1 A A E
> attribsEx=
> rescue-fd: restore.c:259-0 Got hdr: Files=0 FilInx=2410 Stream=1, Unix 
> attributes.
> rescue-fd: restore.c:272-0 Got stream: Unix attributes len=75 extract=0
> rescue-fd: attr.c:77-0 Attr: 2410 5 /home/
> rescue-fd: attr.c:83-0 Got Attr: FilInx=2410 type=5
> rescue-fd: attr.c:116-0 unpack_attr FI=2410 Type=5 fname=/home/ attr=P0A 
> G1YAB EHt X A A A BAA BAA Q BIRbtT BIRaCQ BIRaCQ A A E lname= attrEx= ds=0
> rescue-fd: restore.c:333-0 File /home/
> attrib=P0A G1YAB EHt X A A A BAA BAA Q BIRbtT BIRaCQ BIRaCQ A A E
> attribsEx=
> rescue-fd: bget_msg.c:71-0 Got BNET_EOD
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=R set=T
> rescue-fd: jcr.c:623-0 OnExit JobStatus=T set=T
> rescue-fd: bfile.c:856-0 Close file -1
> rescue-fd: bfile.c:856-0 Close file -1
> rescue-fd: restore.c:730-0 End Do Restore. Files=0 Bytes=0
> rescue-fd: message.c:1083-0 Enter Jmsg type=4
> rescue-fd: message.c:609-0 Enter dispatch_msg type=4 msg=rescue-fd JobId 
> 1175: Error: 8 non-supported data streams and 0 non-supported attrib 
> streams ignored.
> rescue-fd: message.c:781-0 DIRECTOR for following msg: rescue-fd JobId 
> 1175: Error: 8 non-supported data streams and 0 non-supported attrib 
> streams ignored.
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=T set=T
> rescue-fd: jcr.c:623-0 OnExit JobStatus=T set=T
> rescue-fd: job.c:1693-0 bfiled>stored: read close session 38
> rescue-fd: jcr.c:603-0 OnEntry JobStatus=T set=E
> rescue-fd: jcr.c:623-0 OnExit JobStatus=E set=E
> rescue-fd: job.c:1710-0 End FD msg: 2800 End Job TermCode=69 JobFiles=0 
> ReadBytes=0 JobBytes=0 Errors=2 VSS=0 Encrypt=0
> rescue-fd: job.c:1715-0 Done in job.c
> rescue-fd: job.c:252-0 Quit command loop. Canceled=1
> rescue-fd: runscript.c:103-0 runscript: running all RUNSCRIPT object 
> (ClientAfterJob) JobStatus=E
> rescue-fd: job.c:343-0 Calling term_find_files
> rescue-fd: job.c:346-0 Done with term_find_files
> rescue-fd: runscript.c:252-0 runscript: freeing all RUNSCRIPTS object
> rescue-fd: message.c:416-0 Close_msg jcr=80a9a70
> rescue-fd: message.c:416-0 Close_msg jcr=0
> rescue-fd: message.c:428-0 ===Begin close msg resource at 80a85e0
> rescue-fd: message.c:512-0 Done walking message chain.
> rescue-fd: message.c:519-0 ===End close msg resource
> rescue-fd: mem_pool.c:377-0 garbage collect memory pool
> rescue-fd: job.c:348-0 Done with free_jcr
>  
>  
> 
> 
> ------------------------------------------------------------------------
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

-- 
Arno Lehmann
IT-Service Lehmann
www.its-lehmann.de

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Bacula-users] how to not recyle one volume (backing up to diskfiles), Arno Lehmann
Next by Date:  Re: [Bacula-users] bacula 2.2.6 incompatable with 2.4.0??, Arno Lehmann
Previous by Thread:  [Bacula-users] bacula 2.2.6 incompatable with 2.4.0??, RYAN vAN GINNEKEN
Next by Thread:  Re: [Bacula-users] bacula 2.2.6 incompatable with 2.4.0??, Arno Lehmann
Indexes:  [Date] [Thread] [Top] [All Lists]