> 12-jun 08:07 servfich-sd JobId 47: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 12-jun 08:07 servfich-sd JobId 47: Please mount Volume "A0000003" or label a
> new one for:
>
You should not see this error on a tape that has been written to it
unless the tape or the drive is bad. If it is a never used tape this
is a normal error because the drive will not let you read an unwritten
tape.

John

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users