[Bacula-users] Error in btape
2008-06-02 09:05:12
Hello
I'dont understand this error ¡¡¡
please help me ¡¡
bacula:/etc/bacula2# btape -c bacula-sd.conf /dev/nst0
..................
Do you wish to continue with the Autochanger test? (y/n): y
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Slot 1 loaded. I am going to unload it.
3302 Issuing autochanger "unload 1 0" command.
unload status=Bad 268435457
3992 Bad autochanger command: /etc/bacula2/scripts/mtx-changer /dev/sg6 unload
1 /dev/nst0 0
3992 result="Unloading drive 0 into Storage Element 1...mtx: Request Sense:
Long Report=yes
": ERR=Child exited with code 1
3303 Issuing autochanger "load 1 0" command.
3993 Bad autochanger command: /etc/bacula2/scripts/mtx-changer /dev/sg6 load
1 /dev/nst0 0
3993 result="Drive 0 Full (Storage Element 1 loaded)
": ERR=Child exited with code 1
You must correct this error or the Autochanger will not work.
*q
I run the mtx-changer scripts with no problems.
# bacula:/etc/bacula2/scripts# /etc/bacula2/scripts/mtx-changer /dev/sg6
unload 1 /dev/nst0 0
Unloading drive 0 into Storage Element 1...done
bacula:/etc/bacula2/scripts# /etc/bacula2/scripts/mtx-changer /dev/sg6 load
1 /dev/nst0 0
Loading media from Storage Element 1 into drive 0...done
--
Belen
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] Error in btape,
Belen <=
|
|
|