Re: [Bacula-users] doesn't register loaded tape
2008-05-31 22:47:50
Maria McKinley wrote:
>
> Help! It has happened again this week. Releasing and mounting is not
> helping at all. Any ideas?
>
> thanks,
> maria
>
Playing around a bit more I had this bizarre occurance:
Device status:
Autochanger "Exabyte" with devices:
"Drive-1" (/dev/st0)
Device "Drive-1" (/dev/st0) open but no Bacula volume is currently mounted.
Device is being initialized.
Slot 9 is loaded in drive 0.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0
====
In Use Volume status:
G0000008 on device "Drive-1" (/dev/st0)
Reader=0 writers=0 reserved=1 released=0
====
====
*
*
31-May 19:41 billie-sd JobId 591: Please mount Volume "G0000008" or
label a new one for:
Job: NightlySave.2008-05-31_01.05.32
Storage: "Drive-1" (/dev/st0)
Pool: Weekly
Media type: VXA-2
It obviously sees the tape, but somehow doesn't see the tape...
Argh!
~maria
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|