Hello all,
Well, this time bacula successfully figured out to move the tape from
the scratch pool, so I didn't screw up the storage daemon that way.
Instead, it couldn't figure out it had loaded a tape. No idea if these
two problems are related.
So, the tape is in slot 9, bacula sees it in slot 9, loads slot 9, but
then thinks it hasn't loaded it. Bacula had successfully loaded and used
several tapes before this, the only unusual thing about this tape was
that bacula had moved it from the Scratch pool.
Catalog record for Volume "G0000008" updated to reference slot 9.
Catalog record for Volume "CLNA0001" updated to reference slot 10.
*mount
Automatically selected Storage: Exabyte
3001 OK mount. Device="Drive-1" (/dev/st0)
You have messages.
*
*messages
27-May 00:03 billie-sd JobId 576: 3301 Issuing autochanger "loaded?
drive 0" command.
27-May 00:03 billie-sd JobId 576: 3302 Autochanger "loaded? drive 0",
result: nothing loaded.
27-May 00:03 billie-sd JobId 576: 3304 Issuing autochanger "load slot 9,
drive 0" command.
*
27-May 00:03 billie-sd JobId 576: 3305 Autochanger "load slot 9, drive
0", status is OK.
27-May 00:03 billie-sd JobId 576: 3301 Issuing autochanger "loaded?
drive 0" command.
27-May 00:03 billie-sd JobId 576: 3302 Autochanger "loaded? drive 0",
result is Slot 9.
*
27-May 00:03 billie-sd JobId 576: Please mount Volume "G0000008" or
label a new one for:
Job: NightlySave.2008-05-24_01.05.06
Storage: "Drive-1" (/dev/st0)
Pool: Weekly
from the log file:
24-May 20:36 billie-dir JobId 576: Using Volume "G0000008" from
'Scratch' pool.
24-May 20:36 billie-sd JobId 576: 3307 Issuing autochanger "unload slot
5, drive 0" command.
24-May 20:37 billie-sd JobId 576: 3304 Issuing autochanger "load slot 9,
drive 0" command.
24-May 20:37 billie-sd JobId 576: 3305 Autochanger "load slot 9, drive
0", status is OK.
24-May 20:37 billie-sd JobId 576: 3301 Issuing autochanger "loaded?
drive 0" command.
24-May 20:37 billie-sd JobId 576: 3302 Autochanger "loaded? drive 0",
result is Slot 9.
24-May 20:38 billie-sd JobId 576: Please mount Volume "G0000008" or
label a new one for:
Job: NightlySave.2008-05-24_01.05.06
Storage: "Drive-1" (/dev/st0)
Pool: Weekly
Media type: VXA-2
25-May 12:01 billie-sd JobId 576: 3301 Issuing autochanger "loaded?
drive 0" command.
25-May 12:01 billie-sd JobId 576: 3302 Autochanger "loaded? drive 0",
result: nothing loaded.
thanks for any hints,
maria
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|