Re: [Bacula-users] getting a tape back into the catalog

I have the Magnum 224. How do I get it to mount the tape then after I issue an unmount? Via the front panel on it?

Thanks again John for all your help here.

- Chris

On Wed, Apr 9, 2008 at 4:57 PM, John Drescher <drescherjm AT gmail DOT com> wrote:

On Wed, Apr 9, 2008 at 4:50 PM, Chris Munns <chrismunns AT gmail DOT com> wrote:
> I am trying to get a tape that had been deleted from the catalog back into
> it. I have tried everything I can possibly think of(including manually
> entering it in the database, but it never seems right), but I can't seem to
> get Bacula to treat the tape as if it were new again(labeling, re-labeling
> doesn't work). Is there any easy way for me to completely wipe the tape
> itself clean with Bacula or its associated tools? I want to use the same
> barcode label on it if possible, but if putting a new label on it would
> work, I would just as easily do that instead.
>
> Any thoughts?
>

If you do not care about the data on the tape and just want to label
it for use. Do the following.

unmount a tape using umount in bacula or stop the bacula-sd service to
get bacula to release its lock on the drive.

Then

mt -f /dev/nst0 rewind
mt -f /dev/nst0 weof

Then start the bacula-sd service if you stopped it,
Then label the tape in bacula. Make sure you remove any of the manual
database labeling if it still exists..

John

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users