Yes, that was pretty obvious so I did and it works now so I just need to
find the (Net::FTP::RetrHandle) and perl(Net::FTP::AutoReconnect) files to
make it work.
Can't find them on rpmsearch.

-----Original Message-----
From: backuppc AT kosowsky DOT org [mailto:backuppc AT kosowsky DOT org] 
Sent: August-05-14 11:42 AM
To: General list for user discussion, questions and support
Subject: Re: [BackupPC-users] BackupPc files for Centos 7?

Ed Burgstaler wrote at about 10:15:15 -0500 on Tuesday, August 5, 2014:
 > Hi Kenneth,
 >
 > I tried to build from source but I'm no doubt missing some command
arguments  > because here is what happens:
 > What should I do  to solve these dependencies? Thanks Ummmm... download &
install the dependencies... seems pretty obvious...

 >
 > [root@backuppc ~]# rpmbuild --rebuild BackupPC-3.3.0-2.el6.src.rpm  >
Installing BackupPC-3.3.0-2.el6.src.rpm  > warning:
BackupPC-3.3.0-2.el6.src.rpm: Header V3 RSA/SHA256 Signature, key  > ID 0  >
08b895: NOKEY  > warning: user mockbuild does not exist - using root  >
warning: group mockbuild does not exist - using root  > warning: user
mockbuild does not exist - using root  > warning: group mockbuild does not
exist - using root  > warning: user mockbuild does not exist - using root  >
warning: group mockbuild does not exist - using root  > warning: user
mockbuild does not exist - using root  > warning: group mockbuild does not
exist - using root  > warning: user mockbuild does not exist - using root  >
warning: group mockbuild does not exist - using root  > warning: user
mockbuild does not exist - using root  > warning: group mockbuild does not
exist - using root  > warning: user mockbuild does not exist - using root  >
warning: group mockbuild does not exist - using root  > warning: user
mockbuild does not exist - using root  > warning: group mockbuild does not
exist - using root  > warning: user mockbuild does not exist - using root  >
warning: user mockbuild does not exist - using root  > warning: group
mockbuild does not exist - using root  > warning: user mockbuild does not
exist - using root  > warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root  > warning: group
mockbuild does not exist - using root  > warning: user mockbuild does not
exist - using root  > warning: group mockbuild does not exist - using root
> error: Failed build dependencies:
 >         /usr/bin/smbclient is needed by
BackupPC-3.3.0-2.el7.centos.x86_64
 >         /usr/bin/nmblookup is needed by
BackupPC-3.3.0-2.el7.centos.x86_64
 >         perl(Compress::Zlib) is needed by
BackupPC-3.3.0-2.el7.centos.x86_64
 >         perl(Digest::MD5) is needed by BackupPC-3.3.0-2.el7.centos.x86_64
 >         selinux-policy-devel is needed by
BackupPC-3.3.0-2.el7.centos.x86_64
 >         checkpolicy is needed by BackupPC-3.3.0-2.el7.centos.x86_64
 > [root@backuppc ~]#
 >
 > -----Original Message-----
 > From: Kenneth Porter [mailto:shiva AT sewingwitch DOT com]  > Sent: 
 > August-04-14
11:35 PM  > To: General list for user discussion, questions and support  >
Subject: Re: [BackupPC-users] BackupPc files for Centos 7?
 >
 > --On Monday, August 04, 2014 4:17 PM +0200 Jurie Botha  >
<jurieb AT taprojects.co DOT za> wrote:
 >
 > > Why not build from source? It's really not that difficult.
 >
 > Building from a source RPM IS building from source. The source RPM
includes  > the source tarball, patches needed to customized the system to
the distro,  > and a meta build script that unpacks the tarball, applies the
patches,  > invokes the right make command, and then packages it all up in a
format  > suitable to track the installed files so that updates and removals
work  > properly. It may also include install-time scripts to add a
necessary user  > to run a service as, and to hook the service into the boot
and shutdown  > system.
 >
 > Here's how to set up your build system:
 >
 > <http://www.g-loaded.eu/2006/04/05/how-to-build-rpm-packages-on-fedora/>
 >
 > Grab the source RPM here:
 >
 >
<http://dl.fedoraproject.org/pub/epel/6/SRPMS/BackupPC-3.3.0-2.el6.src.rpm>
 >
 > Command to turn a source RPM into a binary RPM:
 >
 > rpmbuild --rebuild BackupPC-3.3.0-2.el6.src.rpm  >  > (You might need to
add some options to that command line. I usually add  > "--define 'dist kp'"
to define dist as "kp" to mark the packages I build. 
 > The dist variable gets suffixed to the release number. For official  >
binaries, it has values like "epel".)  >  >
----------------------------------------------------------------------------
 > --
 > Infragistics Professional
 > Build stunning WinForms apps today!
 > Reboot your WinForms applications with our WinForms controls. 
 > Build a bridge from your legacy apps to the future.
 >
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
 > _______________________________________________
 > BackupPC-users mailing list
 > BackupPC-users AT lists.sourceforge DOT net
 > List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
 > Wiki:    http://backuppc.wiki.sourceforge.net
 > Project: http://backuppc.sourceforge.net/  >  >  >
----------------------------------------------------------------------------
--
 > Infragistics Professional
 > Build stunning WinForms apps today!
 > Reboot your WinForms applications with our WinForms controls. 
 > Build a bridge from your legacy apps to the future.
 >
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
 > _______________________________________________
 > BackupPC-users mailing list
 > BackupPC-users AT lists.sourceforge DOT net
 > List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
 > Wiki:    http://backuppc.wiki.sourceforge.net
 > Project: http://backuppc.sourceforge.net/

----------------------------------------------------------------------------
--
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls. 
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/


------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls. 
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/