[BackupPC-users] Problem on Etch
2009-01-29 00:50:26
Hello all,
We have a backuppc 3.1 installation on Debian Etch with ~50 hosts and hundreds
of GBs - works fine.
*Worked* fine I must say because I dist-upgraded etch and got back the old
2.1.2-6 version - apparently I forgot to apt-pin the package to backports..
So now my installation is messed up badly!
Before I make any further changes to the server, has anyone previous experience
in this situtation? Any other tips as how to restore my previous setup?
(Would be a real pain to manually re-enter all hosts and wait for the data to
come in again...)
Thanks,
John
The stock version is: 2.1.2-6
The version I use from backports is: 3.1.0-4~bpo40+1
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [BackupPC-users] Problem on Etch,
John <=
|
|
|