BackupPC-users

[BackupPC-users] Backup Failed - Server is a Dlink DNS-323

2008-06-26 07:23:13
Subject: [BackupPC-users] Backup Failed - Server is a Dlink DNS-323
From: naigy <backuppc-forum AT backupcentral DOT com>
To: backuppc-users AT lists.sourceforge DOT net
Date: Thu, 26 Jun 2008 07:23:07 -0400
****This is an edited version of a previous post****


Hi All,

I recently purchased a Dlink DNS-323 which is a network storage device and have 
installed Backuppc on it as I had seen it should work on the guide listed below
http://wiki.dns323.info/howto:backuppc

I have installed it pretty much as it is in the guide but instead of using 
rsync I am wanting to use SMB. I realise the benefits of RSYNC and I may 
convert to that later but for the moment at least do not want to have to 
install something on all my PC's, file server etc.

On the DNS-323 it does not have the nmblookup executable however I can get it 
to see my PCs or so it seems as I am getting successful pings. The way I have 
done this is my listing my PC's in the /etc/hosts file.

When I attempt to backup a share from any of my PC's which run a variety of 
Windows XP, Vista and a file server running Debian Etch (Linksys Nslu2) it says 
backup in progress for a couple of seconds and then gives the following error


> This PC is used by root. 
> Last status is state "idle" (backup failed) as of 6/26 21:02. 
> Last error is "No files dumped for share shared". 
> Pings to linksys have succeeded 1 consecutive times. 


or in further detail the log is as follows

> Contents of file /ffp/backuppcdata/pc/linksys/XferLOG.bad, modified 
> 2008-06-26 21:02:13 
> 
> Running: /usr/bin/smbclient \\\\linksys\\shared -U craig -E -N -d 1 -c 
> tarmode\ full -Tc -
> full backup started for share shared
> Xfer PIDs are now 1737,1736
> tarExtract: Done: 0 errors, 0 filesExist, 0 sizeExist, 0 sizeExistComp, 0 
> filesTotal, 0 sizeTotal
> Got fatal error during xfer (No files dumped for share shared)
> Backup aborted (No files dumped for share shared)
> Not saving this as a partial backup since it has fewer files than the prior 
> one (got 0 and 0 files versus 0)






Any advice on how to locate the possible causes for this error would be 
appreciated. Thanks. I have searched google and the forums but can't find much 
which seems to relate to my problem or using smb shares.

+----------------------------------------------------------------------
|This was sent by craigblack AT exemail.com DOT au via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------



-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/

<Prev in Thread] Current Thread [Next in Thread>