Re: more restore problems with tape spanning...
2007-06-20 06:58:00
* Jean-Louis Martineau <martineau AT zmanda DOT com> [20070619 13:39]:
> The '-d' option is ignored if you use a changer.
>
> What is your tapedev? `amgetconf stk_80-conf2 tapedev`
> Is it valid?
/opt/amanda/amanda2/sbin/amgetconf stk_80-conf2 tapedev
/hw/tape/tps22d2nrnsv
> What's in the amfetchdump.*.debug?
No debug files for amfetchdump. That gave me the tip: I had
seen this before on a test config. A mix of 2 different config
apparantly as I found the amfetchdump.*.debug files in
/tmp/amanda-spantest/server/stk_80-conf2. My mistake.
I distcleaned and recompiled from scratch just to be sure.
I have appended the amfetchdump debug file just in case.
amfetcdump just stops after reaching the end of the first tape:
./icbm/inv_xfm/mni_icbm_00241_t1_nl_118_step4.xfm
./icbm/inv_xfm/mni_icbm_00241_t1_nl_118_step4_grid_0.mnc
could not fsf /hw/tape/tps22d2nrnsv: No space left on device
amfetchdump: could not fsf /hw/tape/tps22d2nrnsv: No space left on device
/usr/freeware/bin/tar: Unexpected EOF in archive
/usr/freeware/bin/tar: Unexpected EOF in archive
/usr/freeware/bin/tar: Error is not recoverable: exiting now
I'm must be missing something right in front of my eyes...
jf
>
> Jean-Louis
>
> Jean-Francois Malouin wrote:
> >with amanda-2.5.2p1 trying to pull the last full of a DLE
> >using amfetchdump. All needed tapes are loaded in the library and I used
> >amtape to load the first one. Same thing happens if I specify the tape
> >device to amfetchdump '-d /hw/tape/tps22d2nrnsv' with or without '-a'.
> >
> ># /opt/amanda/amanda2/sbin/amfetchdump -p -a stk_80-conf2 \
> >yorick /data/ipl/ipl10 20070616 | /usr/freeware/bin/tar -xvpf -
> >6 tape(s) needed for restoration
> >The following tapes are needed: stk_40-conf2-000028
> >stk_40-conf2-000029 stk_40-conf2-000030 stk_40-conf2-000021
> >stk_40-conf2-000032 stk_40-conf2-000022
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Looking for tape stk_40-conf2-000028...
> >no tapedev specified
> >amfetchdump: error reading file header: Bad file number
> >Not an amanda tape
> >Insert tape labeled stk_40-conf2-000028 in device (null)
> >and press enter, ^D to finish reading tapes
> >
> >
> >thanks
> >jf
> >
--
<° ><
amfetchdump.20070619175728.debug
Description: Text document
|
|
|