My configuration:
build:
VERSION="Amanda-2.5.2-20070530"
BUILT_DATE="Thu
May 31 09:14:26 EDT 2007"
BUILT_MACH="SunOS
zorn.math.purdue.edu 5.10 Generic_118833-03 sun4u sparc
SUNW,Sun-Fire-280R"
CC="/pkgs/gcc-3.4.3/bin/gcc"
CONFIGURE_COMMAND="'./configure' 'CC=/pkgs/gcc-3.4.3/bin/gcc'
'MT=/opt/csw/bin/mt' 'MTF=-f' 'MTX=/opt/csw/sbin/mtx' 'PERL=/opt/csw/bin/perl'
'--prefix=/local/Amanda/amanda-2.5.2-20070530' '--with-user=amanda'
'--with-group=operator' '--with-gnutar=/opt/csw/bin/gtar'
'--with-gnutar-listdir=/var/amanda/gnutar-lists'
'--with-includes=/opt/csw/include' '--with-libraries=/opt/csw/lib'
'--with-index-server=zorn' '--with-smbclient=/pkgs/samba/bin/smbclient'
'--with-tape-device=/dev/rmt/1bn' '--with-changer-device=/dev/changer/1'
'--with-maxtapeblocksize=2048'"
paths:
bindir="/local/Amanda/amanda-2.5.2-20070530/bin"
sbindir="/local/Amanda/amanda-2.5.2-20070530/sbin"
libexecdir="/local/Amanda/amanda-2.5.2-20070530/libexec"
mandir="/local/Amanda/amanda-2.5.2-20070530/man"
AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda"
CONFIG_DIR="/local/Amanda/amanda-2.5.2-20070530/etc/amanda"
DEV_PREFIX="/dev/dsk/" RDEV_PREFIX="/dev/rdsk/"
DUMP="/usr/sbin/ufsdump" RESTORE="/usr/sbin/ufsrestore"
VDUMP=UNDEF
VRESTORE=UNDEF XFSDUMP=UNDEF XFSRESTORE=UNDEF
VXDUMP=UNDEF
VXRESTORE=UNDEF
SAMBA_CLIENT="/pkgs/samba/bin/smbclient"
GNUTAR="/opt/csw/bin/gtar"
COMPRESS_PATH="/bin/gzip"
UNCOMPRESS_PATH="/bin/gzip" LPRCMD="/local/bin/lpr"
MAILER="/usr/ucb/Mail"
listed_incr_dir="/var/amanda/gnutar-lists"
defs:
DEFAULT_SERVER="zorn" DEFAULT_CONFIG="DailySet1"
DEFAULT_TAPE_SERVER="zorn"
DEFAULT_TAPE_DEVICE="/dev/rmt/1bn" NEED_STRSTR HAVE_SYSVSHM
LOCKING=**NONE**
SETPGRP_VOID DEBUG_CODE AMANDA_DEBUG_DAYS=4
BSD_SECURITY
RSH_SECURITY USE_AMANDAHOSTS
CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP
COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
I tested amrecover on a file that was backed up with amanda-20070530
and had no problem.
Today I tried to do a amrecover on a file the was backed
up with amanda-2.5.1p2 and get the following:
Extracting files using tape
drive /dev/rmt/1bn on host zorn.
Load tape D00005 now
Continue [?/Y/n/s/t]? y
Not an amanda tape
Looking for tape D00005...
Not an amanda tape
Load tape D00005 now
Continue [?/Y/n/t]? y
Not an amanda tape
Not an amanda tape
Looking for tape D00005...
^[[ANot an amanda tape
Load tape D00005 now
Continue [?/Y/n/t]? y
Continue [?/Y/n/t]?
Not an amanda tape
Not an amanda tape
Looking for tape D00005...
Not an amanda tape
Load tape D00005 now
Continue [?/Y/n/t]? n
The following is from amrecover.20070601151822.debug:
amidxtaped_streams[0].fd =
810a0
amrecover: time 353.630:
security_streaminit(stream=8bf88, driver=ff2d8f6c (BSD))
amrecover: time 353.635:
connect_port: Try port 0: Available -
amrecover: time 353.635:
connected to 128.210.3.177.50856
amrecover: time 353.635: our
side is 0.0.0.0.50860
amrecover: time 353.635:
try_socksize: send buffer size is 65536
amrecover: time 353.635:
try_socksize: receive buffer size is 65536
amidxtaped_streams[1].fd =
8bf88
amrecover: time 353.635:
security_close(handle=7d2f8, driver=ff2d8f6c (BSD))
amrecover: time 581.477:
security_stream_close(8bf88)
amrecover: time 581.478:
Can't read file header
amrecover: time 581.479: pid
2521 finish time Fri Jun 1 15:28:03 2007
amrecover: time 581.484:
security_stream_close(810a0)
amrecover: time 822.433:
security_stream_close(732d8)
amrecover: time 822.434: pid
1863 finish time Fri Jun 1 15:32:04 2007
which seems to fit “Not an amanda tape”
message from the amrecover script.
I do not remember seeing anything about this any of
the amanda-users forum but could have over looked.
Robert
_____________________________________________________________________
Robert P. McGraw, Jr.
Manager, Computer System EMAIL:
rmcgraw AT purdue DOT edu
Purdue
University
ROOM: MATH-807
Department of Mathematics PHONE: (765)
494-6055
150 N. University Street FAX: (419)
821-0540
West Lafayette,
IN 47907-2067
