Amanda-Users

Re: invalid ai_flags error with 2.5.2

2007-05-17 15:36:53
Subject: Re: invalid ai_flags error with 2.5.2
From: Chris Cameron <chris.cameron AT netthruput DOT com>
To: amanda-users AT amanda DOT org
Date: Thu, 17 May 2007 13:30:09 -0600
Maybe should be under a new subject, but hitting this problem with amanda-2.5.3alpha-20070516.

In my mail report I'm getting:

 app01  /dev/md/dsk/d1  lev 0  FAILED [port open: Network is unreachable]
  prod2  /dev/md/dsk/d1  lev 0  FAILED [port open: Network is unreachable]
  devl2  /dev/md/dsk/d0  lev 0  FAILED [port open: Network is unreachable]
  app01  /dev/md/dsk/d1  lev 0  FAILED [port open: Network is unreachable]
  prod2  /dev/md/dsk/d1  lev 0  FAILED [port open: Network is unreachable]
  devl2  /dev/md/dsk/d0  lev 0  FAILED [port open: Network is unreachable]


In my dumper debug is:

planner.20070516125815.debug:planner: time 1.100: dgram_recv(dgram=ff2deae4, timeout=0, fromaddr=ff2eead0) planner.20070516125815.debug:(sockaddr_in *)ff2eead0 = { 2, 10080, 192.168.120.15 } planner.20070516125815.debug:planner: time 1.100: dgram_send_addr(addr=3ea48, dgram=ff2deae4) planner.20070516125815.debug:(sockaddr_in *)3ea48 = { 2, 10080, 192.168.120.15 } planner.20070516125815.debug:planner: time 1.100: dgram_send_addr: ff2deae4->socket = 3 planner.20070516125815.debug:planner: time 1.100: security_close(handle=3ea28, driver=ff2da06c (BSD)) planner.20070516125815.debug:planner: time 2.014: dgram_recv(dgram=ff2deae4, timeout=0, fromaddr=ff2eead0) planner.20070516125815.debug:(sockaddr_in *)ff2eead0 = { 2, 10080, 192.168.120.10 } planner.20070516125815.debug:planner: time 2.018: dgram_recv(dgram=ff2deae4, timeout=0, fromaddr=ff2eead0) planner.20070516125815.debug:(sockaddr_in *)ff2eead0 = { 2, 10080, 192.168.120.10 } planner.20070516125815.debug:planner: time 2.018: dgram_send_addr(addr=3eb98, dgram=ff2deae4)
dumper: debug 1 pid 8778 ruid 102 euid 0: start at Wed May 16 12:58:15 2007
dumper: debug 1 pid 8778 ruid 102 euid 0: rename at Wed May 16 12:58:15 2007
dumper: time 90.926: connect_port: Try  port 0: Available   -
dumper: time 90.926: connect_portrange: connect from ::.58802 failed: Network is unreachable dumper: time 90.926: connect_portrange: connect to ::1.58801 failed: Network is unreachable
dumper: time 90.927: stream_client: Could not bind to port in range 0-0.
dumper: time 390.965: connect_port: Try  port 0: Available   -
dumper: time 390.966: connect_portrange: connect from ::.58820 failed: Network is unreachable dumper: time 390.966: connect_portrange: connect to ::1.58819 failed: Network is unreachable
dumper: time 390.966: stream_client: Could not bind to port in range 0-0.
dumper: time 690.997: pid 8778 finish time Wed May 16 13:09:46 2007




Which looks like it's trying to connect to the localhost IPv6 address, except I don't see any addresses for any of the other hosts.

My localhost entry doesn't contain any IPv6 entries. amcheck runs fine.


Any ideas?


Thanks,
Chris

Jean-Louis Martineau wrote:
Use latest 2.5.2 snapshot from http://www.zmanda.com/community-builds.php
All patches are included in it.

The 2.5.2 tree is not on cvs, it is on svn, check http://www.amanda.org/download.php

Jean-Louis

<Prev in Thread] Current Thread [Next in Thread>