Here are the corrected bonnie++ results.
1.)
Below are bonnie results on mbthome:/home/public this is on a percraid
controller handled as a single 300GB HDD with LVM allocating the space
to the following filesystems /home, /home/public/,
and /home/public/Ausk... The dump rate last night for this single drive
varied from 1030.7KB/sec to 9257.3 KB/sec depending on the DLE.
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
mbthome.micro 8000M 28458 96 50469 33 19401 11 24847 76 60822 14 287.8 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2264 97 +++++ +++ +++++ +++ 2261 95 +++++ +++ 4866 100
mbthome.microbeef.com,8000M,28458,96,50469,33,19401,11,24847,76,60822,14,287.8,1,16,2264,97,+++++,+++,+++++,+++,2261,95,+++++,+++,4866,100
2.)
Below are the bonnie results on mbthome:/amanda2 this one of the two
active amanda holding disk locations. This is the same percraid
controller card as above but the file system is a LVM built on a RAID5
consisting of a set of 4 disks.
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
mbthome.micro 8000M 27073 87 27785 18 16117 9 27170 73 42742 9 449.5 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2360 99 +++++ +++ +++++ +++ 2326 99 +++++ +++ 4808 98
mbthome.microbeef.com,8000M,27073,87,27785,18,16117,9,27170,73,42742,9,449.5,2,16,2360,99,+++++,+++,+++++,+++,2326,99,+++++,+++,4808,98
3.)
Below are bonnie results for mbthome:/amanda one of the two holding disk
that the amanda.conf file is using. On a megaraid scsi controller
connected to external single disk volume (/dev/sdd1);
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
mbthome.micro 8000M 29962 97 38914 25 20923 12 27870 73 74745 17 256.0 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2298 99 +++++ +++ +++++ +++ 2215 95 +++++ +++ 4981 100
mbthome.microbeef.com,8000M,29962,97,38914,25,20923,12,27870,73,74745,17,256.0,1,16,2298,99,+++++,+++,+++++,+++,2215,95,+++++,+++,4981,100
Regards,
Kenneth Berry
On Wed, 2007-03-07 at 16:03 -0500, Joshua Baker-LePain wrote:
> On Wed, 7 Mar 2007 at 2:30pm, Kenneth Berry wrote
>
> > -------Sequential Output-------- ---Sequential Input--
> > --Random--
> > -Per Char- --Block--- -Rewrite-- -Per Char- --Block---
> > --Seeks---
> > Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %
> > CPU /sec %CPU
> > 1000 31610 98.7 62640 33.1 52888 21.3 37878 100.0 933421 100.0
> > 44261.0 192.5
>
> For any sort of disk benchmarking, your test set should be at least 4X
> the amount of RAM in the system,. So, unless this system only has 256MB
> of RAM, you need to re-run bonnie with a bigger working set.
>
--
Kenneth Berry
Systems Engineer / System Administrator
Micro Beef Technologies
P.O. Box 9262
Amarillo, Texas 79105
806-372-2369
kberry AT microbeef DOT com
The information contained in or attached to this e-mail message is
intended only for the confidential use of the named individual(s) above.
If you are not the named recipient of this message you are hereby
notified that you have received this document and its attachments in
error and that review, dissemination, or copying of this message is
prohibited. If you have received this message in error, please notify
Micro Beef Technologies immediately. Thank you.
|
