Friends,

I am awfully sorry! Everything with my iptables went well so far (amcheck
worked). I just forgot to start xinetd on the dmz machine, embarrassing.

Sorry to waste your time!

Best regards
Uwe

> Hello Lister,
> 
> I read the last weeks in the archive and I wonder if sombody 
> has the same
> configuration as me.
> 
> In one of my configs I have a machine to backup, which is in the DMZ.
> Firewall and DMZ are SuSE 9.3 with SuSEfirewall2 iptables 
> script and amanda
> version 2.4.4p3.
> 
> LAN amanda with tape ---- Firewall ---- DMZ to be stored
>                              |
>                           Internet
> 
> I did some initial test with a "FW_FORWARD" entry and next to 
> the following
> line in /var/log/firewall I cannot see any drops or accepts.
> "Feb 24 22:48:45 firewall kernel: SFW2-FWDint-ACC-FORW 
> IN=eth0 OUT=eth1
> SRC=192.168.10.2 DST=10.10.100.2 LEN=145 TOS=0x00 PREC=0x00 
> TTL=63 ID=5 DF
> PROTO=UDP SPT=676 DPT=10080 LEN=125"
> 
> If someone has the same config I would appreciate to get some hints to
> configure the SuSEfirewall2 script.
> 
> How can I find out, which tcp/udp port are pre-configured in 
> the SuSE amanda
> rpm?
> 
> If no one has the same config as me, I will start to read and try to
> understand how you listers helped Chuck Amadi during the last days...
> 
> Thanks in advance
> Uwe
> 
> 
> ____________
> Virus checked by G DATA AntiVirusKit
> Version: AVK 16.5745 from 24.02.2006
> 
> 
> 


____________
Virus checked by G DATA AntiVirusKit
Version: AVK 16.5768 from 25.02.2006