A check of the log shows that the taper is complaining that a new tape
isn't in the rack! But there are plenty of tapes (30)...

[amanda@amanda Daily]$ more log.20050915.4
START driver date 20050915
DISK planner cml10 /home/moodle
DISK planner m254.gc.cuny.edu /home/m254/dmulcahey/
START planner date 20050915
WARNING driver WARNING: /var/tmp/amanda: 10485760 KB requested, but only 7812680
 KB available.
INFO planner Adding new disk cml10:/home/moodle.
INFO planner Adding new disk m254.gc.cuny.edu:/home/m254/dmulcahey/.
FINISH planner date 20050915
STATS driver startup time 0.477
ERROR taper no-tape [new tape not found in rack]
FAIL driver m254.gc.cuny.edu /home/m254/dmulcahey/ 20050915 0 [can't switch to i
ncremental dump]
FAIL driver cml10 /home/moodle 20050915 0 [can't switch to incremental dump]
FINISH driver date 20050915 time 10.037



-----Original Message-----
From: owner-amanda-users AT amanda DOT org on behalf of Lengyel, Florian
Sent: Thu 9/15/2005 7:25 PM
To: amanda-users AT amanda DOT org; amanda-users AT amanda DOT org
Subject: Wait for dumping

I have a new server I've added to my disklist.
Unlike the other servers, each of the DLEs waits for dumping.
The system is RH EL 4.

amanda rpms on the client:

amanda-client-2.4.4p3-1
amanda-2.4.4p3-1

on the amanda server:

identical to the above (just checked to make sure)

/etc/xinetd.d/amanda is correct; I've added an entry
for /etc/xinet.d./amandaidx, which wasn't there. (I've seen
instructions that assert this must be present on the client--is this
so?).

netstat -ul | grep amanda shows the correct thing

What do I need to do to debug this?