Re: Amanda question
2005-05-17 22:31:01
Peter Kunst wrote:
Hi Ryan,
Ryan Pagquil wrote:
Hi guys,
This is the latest report that amstatus reported. Could you please
explain what seems to be the problem with my setup and what are the
parameters means. I setup the firewall to accept amanda on UDP and
TCP port, but i got this "Connection timed out" on some hosts. What
does amanda means of wait for dumping in some host? does it need to
be run again to get the dump from the host?
do you have amanda configured with
--with-tcpportrange=low,high bind unreserved TCP server sockets to
ports within this range unlimited
or
--with-udpportrange=low,high bind reserved UDP server sockets to
ports within this range unlimited
or
--with-portrange=low,high bind unreserved TCP server sockets to
ports within this range unlimited
on your clients AND server(s), and also configured your firewall using
those ports to amanda clients and server(s), too ?
i specified --with-udpportrange, --with-tcpportrange and
--with-portrange on my configure run. and enabled those ports on my
firewall on both sides (server and hosts).
never seen "(aborted:could not connect to data port: Connection timed
out)
(too many dumper retry)" anyways... only if clients are completely
"down"...
/etc/inetd.conf entries correctly configured ? inetd restarted
afterwards ?
i restarted xinetd after the configuration.
what is "amcheck <yourconfig>" saying ?
amcheck did not report any errors.
Cheers, Peter
mail1:/data/ 0 1572970k wait for dumping
mail1:/etc/ 1 driver: (aborted:could not connect
to data port: Connection timed out)(too many dumper retry)
mail1:/usr/lib/courier-imap/etc/ 1 driver: (aborted:could not connect
to data port: Connection timed out)(too many dumper retry)
mail1:/usr/local/scripts/ 0 6595k wait for dumping
mail1:/var/qmail/control/ 1 driver: (aborted:could not connect
to data port: Connection timed out)(too many dumper retry)
mcs:/etc/ 1 9k dump done (16:13:03),
wait for writing to tape
mcs:/usr/etc/perdition/ 1 0k dump done (16:14:33),
wait for writing to tape
mcs:/usr/local/scripts/ 1 0k dump done (16:14:02),
wait for writing to tape
mcs:/var/qmail/control/ 1 3k dump done (16:14:18),
wait for writing to tape
ns1:/chroot/ 0 13705k wait for dumping
ns1:/etc/ 1 1k dump done (16:13:03),
wait for writing to tape
ns1:/usr/bin/ 0 8245k wait for dumping
radius:/etc/ 1 driver: (aborted:could not connect
to data port: Connection timed out)(too many dumper retry)
radius:/usr/local/src/scripts/ 1 driver: (aborted:could not connect
to data port: Connection timed out)(too many dumper retry)
radius:/var/lib/mysql/ 0 754630k wait for dumping
samba:/etc/ 1 3k dump done (16:13:18),
wait for writing to tape
samba:/etc/samba/ 1 4k dump done (16:13:06),
wait for writing to tape
SUMMARY part real estimated
size size
partition : 17
estimated : 17 2359300k
flush : 0 0k
failed : 5 2931k ( 0.12%)
wait for dumping: 5 2356145k ( 99.87%)
dumping to tape : 0 0k ( 0.00%)
dumping : 0 0k 0k ( 0.00%) ( 0.00%)
dumped : 7 20k 224k ( 8.93%) ( 0.00%)
wait for writing: 7 20k 224k ( 8.93%) ( 0.00%)
wait to flush : 0 0k 0k (100.00%) ( 0.00%)
writing to tape : 0 0k 0k ( 0.00%) ( 0.00%)
failed to tape : 0 0k 0k ( 0.00%) ( 0.00%)
taped : 0 0k 0k ( 0.00%) ( 0.00%)
25 dumpers idle : no-diskspace
taper idle
network free kps: 2400
holding space : 3749k ( 93.73%)
dumper0 busy : 0:19:25 ( 73.37%)
dumper1 busy : 0:09:29 ( 35.84%)
dumper2 busy : 0:03:24 ( 12.86%)
dumper3 busy : 0:00:33 ( 2.13%)
dumper4 busy : 0:00:00 ( 0.03%)
0 dumpers busy : 0:05:28 ( 20.68%) not-idle: 0:05:28
(100.00%)
1 dumper busy : 0:07:03 ( 26.66%) no-diskspace: 0:07:03
(100.00%)
2 dumpers busy : 0:13:02 ( 49.26%) no-diskspace: 0:12:51 (
98.60%)
start-wait: 0:00:10
( 1.40%)
3 dumpers busy : 0:00:48 ( 3.05%) no-diskspace: 0:00:45 (
93.02%)
start-wait: 0:00:03
( 6.98%)
4 dumpers busy : 0:00:00 ( 0.05%)
5 dumpers busy : 0:00:00 ( 0.02%)
Thanks in advance,
--
Ryan Pagquil
Infodyne Inc. - PhilOnline.com
3603 Antel Global Corporate Center
Doña Julia Vargas Ave.
Ortigas Center Pasig City
Tel: 687-0715
Web: www.philonline.com
|
|
|