Re: Tape error - how 'bad' is this?
2004-05-11 06:25:21
Hi, Dave Ewart,
on Dienstag, 11. Mai 2004 at 11:47 you wrote to amanda-users:
DE> blackhole: ~ # mt -f /dev/st0 status
DE> drive type = Generic SCSI-2 tape
DE> drive status = 1073741824
DE> sense key error = 0
DE> residue count = 0
DE> file number = 0
DE> block number = 0
DE> Tape block size 0 bytes. Density code 0x40 (unknown).
DE> Soft error count since last status=0
DE> General status bits on (41010000):
DE> BOT ONLINE IM_REP_EN
DE> Anything odd there?
No.
Try to write and read things to/from a tape and look at your
kernel-messages.
>> Maybe try another tape, but as you said that this happens since 2 days
>> (and 2 tapes, I assume, or is it still the same?) the scsi-system
>> seems to be responsible.
DE> Appears to have affected two tapes now ... so I'm guessing it's not the
DE> tapes. Will try playing with the connectors and perhaps reseat the
DE> controller card, that sort of thing.
This sometimes does the trick ...
--
best regards,
Stefan
Stefan G. Weichinger
mailto:monitor AT oops.co DOT at
|
|
|