Amanda-Users

RE: backups stopped after upgrade to redhat 9?

2003-10-20 13:00:11
Subject: RE: backups stopped after upgrade to redhat 9?
From: "Amanda Admin" <amanda AT denverdata DOT com>
Date: Mon, 20 Oct 2003 10:54:54 -0600
Maybe I'm off base, but haven't there been some recent threads about changes
in signal handling in RH 9? I think a patch to amanda 2.4.4 was posted to
fix the problem.

Search the archives for redhat 9, or SIG -- should be within the last two
months.

Note that I don't have RH9, so I haven't had this problem nor had to apply
the patch.

Doug

> -----Original Message-----
> From: owner-amanda-users AT amanda DOT org
> [mailto:owner-amanda-users AT amanda DOT org]On Behalf Of C.Scheeder
> Sent: Sunday, October 19, 2003 11:35 PM
> To: dwtrusty
> Cc: amanda-users AT amanda DOT org
> Subject: Re: backups stopped after upgrade to redhat 9?
>
>
> Hi,
> check your local firewall-settings.
> Even if you didn't change them or set them up there may be some.
> RH has decided around V8 to implement restrictive firewallrules
> as default, without asking for confirmation for doing it.
> That problem bit many other amanda-users before you.
> Christoph
>
> dwtrusty schrieb:
> > Thanks for the tips.
> >
> > All the low-level commands seem to be in order.
> >
> > I can use ammt, mt, amtape, mtx successfully.  I can use tar to write
> > to the tape, and read the contents back.  Amcheck shows no errors.
> >
> > I'm using version 2.4.3.
> >
> > What else should I check?
> >
> > Thanks,
> >
> > David
> >
> >
> >
> >
> > --- In amanda-users AT yahoogroups DOT com, Jon LaBadie <jon@j...> wrote:
> >
> >>On Sat, Oct 18, 2003 at 10:21:21PM -0500, David Trusty wrote:
> >>
> >>>Hi,
> >>>
> >>>After I upgraded my system to redhat 9, the backups have quit working.
> >>>
> >>>The file "/var/lib/DailySet1/amdump" ends with this line:
> >>>  taper: stream_accept: timeout after 120 seconds
> >>>
> >>
> >>Step back.  After the upgrade:
> >>
> >>Can you write to your tape with things like dd?
> >>Do mt commands work with your tape drive?
> >>How about ammt?
> >>If it is a changer, can you manipulate it with mtx?
> >>Do amtape commands work?
> >>What does amcheck say?
> >>
> >>--
> >>Jon H. LaBadie                  jon@j...
> >> JG Computing
> >> 4455 Province Line Road        (609) 252-0159
> >> Princeton, NJ  08540-4322      (609) 683-7220 (fax)
> >
> >
>


<Prev in Thread] Current Thread [Next in Thread>