On Wed, Aug 20, 2003 at 01:24:07PM -0700, Chris Fairman wrote:
> Hi,
>
>
> I'm having problems getting Amanda amanda-2.4.4p1 to
> install/work on BSDi 5. I've read and re-read all the documentation, and
> I'm using this list as a 'last resort.'
>
>
> I'm hoping this may be just a simple configuration issue:
>
> I can successfully build and install the Amanda
> package, but when running amlabel, it asks: "insert tape into slot and
> press return" I do so and press <enter> but the message repeats itself.
> I need to ctrl-c to get out of it. I am using a VXA-2 Tape Drive.
>
>
> Things I have tried:
>
>
> I can run mt and receive tape drive information as user: amanda
Obvious "is the plug in the wall" type questions first.
You say you can get status back from mt. Can you also write and read
to the tape drive. And then use mt to move forward to the next file,
or rewind, or ...
Say you do this:
$ mt -f /dev/nrst0 rewind
$ cat /tmp/* | dd of=/dev/nrst0 bs=32k
$ tar -cf /dev/nrst0 /etc
$ tar -cf /dev/nrst0 /bin
$ mt -f /dev/nrst0 rewind
$ mt -f /dev/nrst0 fsf 1
$ tar -tvf /dev/nrst0
Do you get an "ls -l" type listing of your /etc directory?
If so, then amanda should be able to work with your drive.
And we have other things to consider. :<
jl
--
Jon H. LaBadie jon AT jgcomp DOT com
JG Computing
4455 Province Line Road (609) 252-0159
Princeton, NJ 08540-4322 (609) 683-7220 (fax)
|