OK. we'll do my questions 1 at a time.
First, I'm still struggling to figure out where my changer is: According to
the exabyte folks, my X80 drive was in "emulation" mode, and was emulating a
exabyte 480 until I removed the emulation.
Once booting, it did do a probe-scsi-all successfully, and gave me a note that
said
4000,scsi@3,1, Target 0, unit 0 Rem Dev Type 8 Exabyte V80 2.06
and continued to do
T1,U0 as mamoth M2
T2,U0, as mamoth M2
T3,U0 as mamoth M2 drives
But: even though I see these devices (drives that is, at /dev/rmt/0,1,2, I
STILL Cant find the robot.
(here's a snippet from my syslog this morning...Maybe I'm just missing
something?)
(and what is the error from the Jul 14 07:24:34 tape pcipsy: [ID 370704
kern.info] PCI-device: scsi@1, glm2
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] glm2 is /pci@1f,2000/scsi@1
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] /pci@1f,2000/scsi@1,1 (glm3):
Jul 14 07:24:34 tape Rev. 5 Symbios 53c875 found.
Jul 14 07:24:34 tape pcipsy: [ID 370704 kern.info] PCI-device: scsi@1,1, glm3
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] glm3 is
/pci@1f,2000/scsi@1,1
Jul 14 07:24:34 tape scsi: [ID 193665 kern.info] sd0 at glm0: target 0 lun 0
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] sd0 is
/pci@1f,4000/scsi@3/sd@0,0
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] <SUN18G cyl 7506 alt 2
hd 19 sec 248>
Jul 14 07:24:34 tape scsi: [ID 193665 kern.info] sd1 at glm0: target 1 lun 0
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] sd1 is
/pci@1f,4000/scsi@3/sd@1,0
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] <SUN18G cyl 7506 alt 2
hd 19 sec 248>
Jul 14 07:24:35 tape scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Jul 14 07:24:35 tape genunix: [ID 936769 kern.info] sd6 is
/pci@1f,4000/scsi@3/sd@6,0
Jul 14 07:24:38 tape swapgeneric: [ID 308332 kern.info] root on
/pci@1f,4000/scsi@3/disk@0,0:a fstype ufs
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@1,0
(st8):
Jul 14 07:24:49 tape <Exabyte Mammoth2>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st8 at glm1: target 1 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st8 is
/pci@1f,4000/scsi@3,1/st@1,0
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@2,0
(st9):
Jul 14 07:24:49 tape <Exabyte Mammoth2>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st9 at glm1: target 2 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st9 is
/pci@1f,4000/scsi@3,1/st@2,0
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@3,0
(st10):
Jul 14 07:24:49 tape <Mammoth EXB-8900 8mm Helical Scan>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st10 at glm1: target 3 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st10 is
/pci@1f,4000/scsi@3,1/st@3,0
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token '(hanger' on line 29 of /kernel/drv/sgen.conf
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token '0x08' on line 29 of /kernel/drv/sgen.conf
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token ')x08' on line 29 of /kernel/drv/sgen.conf
Jul 14 07:24:34 tape pcipsy: [ID 370704 kern.info] PCI-device: scsi@1, glm2
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] glm2 is /pci@1f,2000/scsi@1
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] /pci@1f,2000/scsi@1,1 (glm3):
Jul 14 07:24:34 tape Rev. 5 Symbios 53c875 found.
Jul 14 07:24:34 tape pcipsy: [ID 370704 kern.info] PCI-device: scsi@1,1, glm3
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] glm3 is
/pci@1f,2000/scsi@1,1
Jul 14 07:24:34 tape scsi: [ID 193665 kern.info] sd0 at glm0: target 0 lun 0
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] sd0 is
/pci@1f,4000/scsi@3/sd@0,0
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] <SUN18G cyl 7506 alt 2
hd 19 sec 248>
Jul 14 07:24:34 tape scsi: [ID 193665 kern.info] sd1 at glm0: target 1 lun 0
Jul 14 07:24:34 tape genunix: [ID 936769 kern.info] sd1 is
/pci@1f,4000/scsi@3/sd@1,0
Jul 14 07:24:34 tape scsi: [ID 365881 kern.info] <SUN18G cyl 7506 alt 2
hd 19 sec 248>
Jul 14 07:24:35 tape scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Jul 14 07:24:35 tape genunix: [ID 936769 kern.info] sd6 is
/pci@1f,4000/scsi@3/sd@6,0
Jul 14 07:24:38 tape swapgeneric: [ID 308332 kern.info] root on
/pci@1f,4000/scsi@3/disk@0,0:a fstype ufs
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@1,0
(st8):
Jul 14 07:24:49 tape <Exabyte Mammoth2>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st8 at glm1: target 1 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st8 is
/pci@1f,4000/scsi@3,1/st@1,0
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@2,0
(st9):
Jul 14 07:24:49 tape <Exabyte Mammoth2>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st9 at glm1: target 2 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st9 is
/pci@1f,4000/scsi@3,1/st@2,0
Jul 14 07:24:49 tape scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1/st@3,0
(st10):
Jul 14 07:24:49 tape <Mammoth EXB-8900 8mm Helical Scan>
Jul 14 07:24:49 tape scsi: [ID 193665 kern.info] st10 at glm1: target 3 lun 0
Jul 14 07:24:49 tape genunix: [ID 936769 kern.info] st10 is
/pci@1f,4000/scsi@3,1/st@3,0
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token '(hanger' on line 29 of /kernel/drv/sgen.conf
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token '0x08' on line 29 of /kernel/drv/sgen.conf
Jul 14 07:25:03 tape genunix: [ID 107833 kern.warning] WARNING: Unexpected
token ')x08' on line 29 of /kernel/drv/sgen.conf
(and here is the beginning of my /kernel/drv/sgen.conf file:
#
# WARNING: enabling this driver may impact the security and data integrity of
# devices on your system. Please refer to sgen(7d) for details.
#
# sgen may be configured to bind to SCSI devices exporting a particular device
# type, using the device-type-config-list, which is a ',' delimited list of
# strings.
#
device-type-config-list=
"changer" (type 0x08)
I then reedited the sgen.conf file to say
device-type-config-list= "changer" ; # (type 0x08)
Like the sgen man page said to use.
but when I tried a "add_drv sgen" again, it did nothing (and neither did the
boot -r I did after this...)
BUT there wwere no eror msgs like unexpected token from above either.. but no
/dev/scsi there again either...
(Gee, I really WOULDN't be suprised if they were related to the sgen not being
right?!
Mitch
|
