Re: repost (still need some help) :-)
2003-07-04 11:06:53
On Friday 04 July 2003 10:20, Mikkel Gadegaard wrote:
>I had amanda up and running only to discover that the machine acting
> as host didn't have enough HD capacity to run Amanda smoothly. The
> project layed low for several weeks until I got hold of a new and
> bigger machine.
>
>Installed RedHat 9.0 on it and installed amanda and mtx
>
>started configuring everything as I remember doing it the last time,
> but now I've run into problems (So I obviously couldn't remember it
> :-)
>
[...]
>tpchanger "chg-zd-mtx" # the tape-changer glue
> script tapedev "/dev/nst0" # the no-rewind
> tape device used
>changerfile "/var/lib/amanda/BackUp/changer" # path to changer.conf
>changerdev "/dev/sg2" # the changer device
> used
I believe you have the 'tapedev' specified wrong. At least when using
chg-scsi, that is a number only that points to the config number in
chg-scsi.conf because it can contain more than one changers
configuration info, therefore its the config number. In my case its
the first and only, but thats beside the point. It looks like this
in amanda.conf:
tpchanger "chg-scsi" # the tape-changer glue script
tapedev "0" # the no-rewind tape device to be used
changerfile "/usr/local/etc/amanda/DailySet1/chg-scsi.conf"
And of course make sure you are using a consistent name for the
changer.conf file.
--
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz 512M
99.26% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
|
|
|