On Wednesday 27 November 2002 03:53, marc.bigler AT day DOT com wrote:
>Hello,
>
>I am currently setting up an amanda 2.4.3 server on Solaris 9 with
> a Compaq TSL-9000 DDS-3 tape changer device and was wondering
> which "tpchanger" script I should use, will chg-scsi work or do I
> need to use chg-zd-mtx maybe ? The compaq tape changer uses one
> target but then the tape runs on LUN 0 and the changer on LUN 1.
>
>Thanks
>
>Marc

chg-scsi which seems to be right at home with a drive at lun0/robot 
at lun1 setup, is running one of the many variations of Seagate 
4586 changers just fine here.  This is the one that has either a 4 
tape or a 12 tape(the drawer stays open and the magazine runs up 
and down the front of the computer) arranged so the tapes are 
horizontal.  The drive is /dev/nst0, the robot is /dev/sg1.

If this was linux, You'd have to build a kernel with the scsi option  
'scan all luns' turned on else the robot won't be found.  Its not 
on by default.  I don't know about solaris though.

-- 
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz  512M
99.19% setiathome rank, not too shabby for a WV hillbilly