Hi Remco,
When looking at Q LOG F=D, is it 96 GB in " Used Space on File System (MB)"
or " Used Space(MB)"?
If the former, that's normal. New log files are created as soon as old
ones are archived.
If the latter, you may want to revisit the capacity planning to assess if
128 GB is sufficient for that environment.
For a medium size environment, 128 GB is normally sufficient. For large
implementations, 256 GB is recommended (in some cases larger).
-
Thanks,
Marc...
________________________________________________________
Marc Lanteigne
Accelerated Value Specialist for Spectrum Protect
416.478.0233 | marclanteigne AT ca.ibm DOT com
Office Hours: Monday to Friday, 7:00 to 16:00 Eastern
Follow me on: Twitter, developerWorks, LinkedIn
-----Original Message-----
From: Remco Post [mailto:r.post AT PLCS DOT NL]
Sent: Thursday, November 9, 2017 8:47 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] log not flushing
> On 9 Nov 2017, at 13:09, Marc Lanteigne <marclanteigne AT CA.IBM DOT COM>
> wrote:
>
>
> Hi Remco,
>
> That's normal, that's how active logs work. Only the archive log will
> be purged after a database backup.
>
> The active log includes transactions that are in-flight, that is that
> they are currently running. The only reason that they go away when
> you restart the server is that when the server shuts down, it ends all
> the transactions. No transactions=no active logs.
>
> Your server is working normally. Just make sure you have sufficient
> active log space and that the filesystem/LUN used for the active log
> is not shared with anything.
Hi Marc,
you are right, my bad.
But, 96 ff-ing GB of active log on an idle TSM server? no processes, no
sessions, nothing… We have configured 128 GB of active log space for these
servers, so I guess all I can do is wait until the server crashes?
>
> -
> Thanks,
> Marc...
> ________________________________________________________
> Marc Lanteigne
> Accelerated Value Specialist for Spectrum Protect
> 416.478.0233 | marclanteigne AT ca.ibm DOT com Office Hours: Monday to
> Friday, 7:00 to 16:00 Eastern
>
> Follow me on: Twitter, developerWorks, LinkedIn
>
>
> -----Original Message-----
> From: Remco Post [mailto:r.post AT PLCS DOT NL]
> Sent: Thursday, November 9, 2017 7:59 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] log not flushing
>
> Hi All,
>
> for my current customer we’ve build a number of SP 8.1.1 servers. One
> thing that is new is that sometimes the server doesn’t empty the DB2
> active log after a full database backup. The only way it seems that
> the log gets flushed is by restarting the TSM server. I’ve seen this
> now 2 or 3 times in the few months that we’re actively using these
> servers and it makes me feel uneasy. And no, it’s not like the server
> is very busy, the server was completely idle as far as I can see.
>
> --
>
> Met vriendelijke groeten/Kind Regards,
>
> Remco Post
> r.post AT plcs DOT nl
> +31 6 248 21 622
>
--
Met vriendelijke groeten/Kind Regards,
Remco Post
r.post AT plcs DOT nl
+31 6 248 21 622
|
