Hello Stefan
Thanks for the info .... make sense
Best Regards
Robert
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Stefan Bender
Sent: Monday, November 10, 2014 11:29 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] VMCLI question
Hi Robert,
looks like you are using two TDP VMware GUIs. For the same vCenter I would
expect that this is only one GUI and that this single GUI instance is working
with all your data mover nodes.
Here is an overview of the node setup:
http://www.ibm.com/support/knowledgecenter/SS8TDQ_7.1.1/com.ibm.itsm.ve.doc/c_ve_overview_tsmnode.html?lang=en
For one vCenter the TDP VMware client can only work with one VMCLI node on TSM.
When you initially set the password of that VMCLI node on one system (proxy1),
the vmcli executable is connecting to TSM, authenticating and generating a new
password.
If you now connect from an other system (proxy2) using the same VMCLI node to
TSM, it will fail. Resetting the password and connecting to TSM will result in
a new password, which is different from the one on the previous system
(proxy1).
In your case it looks to me as if you should run the GUI on the first system
(proxy1) and use the second system for the data mover, only.
Mit freundlichen Grüßen / best regards
Stefan Bender
Hechtsheimer Strasse 2 / 55131 Mainz / Germany IBM Software Group, Tivoli
Software Development "Tivoli Storage Manager"
Tel. ++49-6131-846989 or ++49-7034-643-2773 / Fax. ++49-06131 -84-2520 /
email: stefan.bender AT de.ibm DOT com
----------------------------------------------------------------------------------------------------------------------------------------------
IBM Deutschland Research & Development GmbH / Vorsitzende des
Aufsichtsrats: Martina Koederitz
Geschäftsführung: Dirk Wittkopp
Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB
243294
From: Robert Ouzen <rouzen AT UNIV.HAIFA.AC DOT IL>
To: ADSM-L AT VM.MARIST DOT EDU
Date: 11/07/2014 18:36
Subject: [ADSM-L] VMCLI question
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
Hi to all
Again another question about TSM for VE 7.1.1.0. Two datamover nodes
vmproxy1 , vmproxy2.
Backups , restores works fine ?
But strange can only reach the TSM VE gui only one by one meaning after a
success login to the first one as:
https://vmproxy1_address:9081/TsmVMwareUI/
Trying to reach the second one as:
https://vmproy2_address:9081/TsmVMwareUI/ got this error:
GVM0025I Successfully determined which product or products installed.
GVM0021I A connecton with the vCenter server has been established.
GVM0022E The VMCLI inquire configuration command failed, the following messages
describe the error.
ANS0282E (RC168) Pasword file is not available. NODE=VMCLI, Asnode=(null)
From the Edit Configuration gui done a Reset VMCLI node and it?s work but then
the first TSM VE datamover gui (vmproxy1) give me now this error. Do the
previous step and now this datamover gui is working but neutralize the second ,
and vice versa ?.
Did it a possibility to run both of them without every time the need of
Resetting the VMCLI node ?
Best Regards
Robert Ouzen
|
