ADSM-L

Re: [ADSM-L] TSM STA Paths

2007-11-23 05:54:47
Subject: Re: [ADSM-L] TSM STA Paths
From: Ian-IT Smith <ian-it.smith AT DB DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Fri, 23 Nov 2007 10:54:20 +0000
I thought the Library manager would be able to mount the drive off the 
element and serial number info in the drive statrement.

Then informthe STA to send data to its SCSI device defined in the path 
associated with that drive.

Although, if the TSM Library manager actually needs the SCSI device to 
mount the tape, then yes I guess the TSM Library Manager->Drive path must 
be configured in addition to the STA->Drive path.


Ian Smith




CAYE PIERRE <Pierre.Caye AT ALCATEL-LUCENT DOT FR> 
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
23/11/2007 10:47
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
Re: [ADSM-L] TSM STA Paths






The library manager, as it is said, is the library manager.
When STA need cartridges, it ask the library manager for it.
The library manager ask the library to mount a tape, then, when it know 
the drive where it is mounted, it will check the label of the cartridge, 
so an access (ie a path) to the drive is needed for the library manager.
Then, knowing the drive, it find the path of the drive on STA side so it 
can tell the STA where the cartridge is mounted and address (ie the 
special file) of the tape.
When you look at drives activity on the library manager, you can see that, 
during mount process of cartridge, the cartridge and the mount point are 
owned by the library manager. Therefore the ownership is transfered to the 
STA.
A select on drives table (allocated_to) during mount process can show you 
all that.

Regards

Pierre

> -----Message d'origine-----
> De : ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] De 
> la part de Ian-IT Smith
> Envoyé : vendredi 23 novembre 2007 10:47
> À : ADSM-L AT VM.MARIST DOT EDU
> Objet : [ADSM-L] TSM STA Paths
> 
> I have a question regarding paths for drives in a storage agent
> environment:
> 
> If drives are in a library, can they be defined on the 
> Library Manager as drive, but ONLY have paths to the storage agent?
> 
> Or must all drives need to be pathed to the library manager 
> as well as the storage agents?
> 
> I was sure that the TSM Library Manager did not require a 
> path to the drive
> 
> 
> Ian Smith
> 
> 
> 
> ---
> 
> This e-mail may contain confidential and/or privileged 
> information. If you are not the intended recipient (or have 
> received this e-mail in error) please notify the sender 
> immediately and delete this e-mail. Any unauthorized copying, 
> disclosure or distribution of the material in this e-mail is 
> strictly forbidden.
> 
> Please refer to 
> http://www.db.com/en/content/eu_disclosures.htm for 
> additional EU corporate and regulatory disclosures.
> 



---

This e-mail may contain confidential and/or privileged information. If you are 
not the intended recipient (or have received this e-mail in error) please 
notify the sender immediately and delete this e-mail. Any unauthorized copying, 
disclosure or distribution of the material in this e-mail is strictly forbidden.

Please refer to http://www.db.com/en/content/eu_disclosures.htm for additional 
EU corporate and regulatory disclosures.

<Prev in Thread] Current Thread [Next in Thread>