ADSM-L

Re: upgrade path from 3590E to 3592

2005-01-13 12:29:04
Subject: Re: upgrade path from 3590E to 3592
From: Ben Bullock <bbullock AT MICRON DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 13 Jan 2005 10:28:40 -0700
        The 3590 and 3592 tapes can coexist in the same frames and
slots. They can all be intermixed.

        The 3590 and 3592 DRIVES cannot coexist in the same frame, so
you must upgrade one whole frame at a time. On our 4 libraries, we
always upgraded the L22 first, as we could then put 4 3592 drives into
the place where the 2 3590 drives were before (so we gain 2 extra drives
to move the data to the new media), but I don't believe that it has to
be done first.

Ben
 

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Eliza Lau
Sent: Thursday, January 13, 2005 8:03 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: upgrade path from 3590E to 3592

I posted the following message a couple of months ago and a lot of you
helped me out.  Looks like we will have the funding for converting one
D12 to D22 with two 3592 drives this fiscal year.  However, management
wants to purchase only 100 3592 tapes this year.  My question is:

Can 3590 and 3592 tapes coexist in the same D22?  A D22 has 335 slots.
I want to fill it with 100 3592 tapes and 235 3590 tapes.  Is this
config supported?  The 3494 is very full.  I can use every single slot.

Also, can we convert the L12 before the D12?  The two 3590 drives in the
L12 are the oldest and the most problematic.  I want to get rid of them
first.

Thanks,
Eliza


>
> We have a 3494 tape library with six 3590E drives.
> I am looking into upgrading the 3590E drives to 3592 drives.
>
> current setup:
> TSM server 5.2.3.3 on AIX 5.2
> 3494 with 3 frames: one L12 and two D12s six 3590E tape drives server 
> and 3590E drives connected to two 2109 SAN switches.
>
> Because of budget constrains I am thinking of replacing a frame and 
> two 3590E drives at a time and spread out the cost over 3 years.
>
> Can someone give me a rough cost estimate before I even propose it.
> Is there anything I missed in the following 3yr plan?
>
> Year 1:
> convert the frame L12 to L22
> replace two 3590E with 3592
> 300 new 3592 tapes
>
> Year 2 and 3:
> convert the frame D12 to D22
> replace two 3590E with 3592
> 300 new 3592 tapes
>
> Thanks,
> Eliza Lau
> Virginia Tech Computing Center
> 1700 Pratt Drive
> Blacksburg, VA 24060
>

<Prev in Thread] Current Thread [Next in Thread>