I had a simailar problem with DLT1 drives, There is an readme on the TSM
site how to update the TSM installation with the SHOW FORMATDLT1 admin
command with the UPDATEFORMAT parameter.
and UPDATE DEVCLASS DLT1 or DLT1C.
regards,
Jan Batteram
IT-Specialist
Royal Swets & Zeitlinger
-----Original Message-----
From: Zlatko Krastev/ACIT [mailto:acit AT ATTGLOBAL DOT NET]
Sent: Tuesday, February 25, 2003 9:54 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Problem with Storagetek L20 and 5.1.6.2
You seem to do everything correct and if it does not work the best way is
to open a PMR with IBM. Try to rescreate the problem on another box.
Zlatko Krastev
IT Consultant
GUILLAUMONT Etienne <eguillau AT RGB-TECHNOLOGIE DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
25.02.2003 09:01
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: Problem with Storagetek L20 and 5.1.6.2
I upgraded 4.1.6 -> 5.1.5 ->5.1.6.0 ->5.1.6.2 I don't remember the version
for the ITSM device driver as I went back but it was the latest available
on the tivoli server. But there was something peculiar : when I issued an
update all with the 5.1.5 cd, the devices were not updated and I had to
specifically install it.
To answer to you last question : I hope that the fact that the drivers
doesn't function is not normal ! :-))
regards
Etienne GUILLAUMONT
e-mail : etienne AT rgb-technologie DOT fr
RGB Technologie
Parc d'Innovation, Bâtiment PYTHAGORE
11 Rue Jean SAPIDUS
67400 ILLKIRCH
Tél : 03 90 40 60 60
Fax : 03 90 40 60 61
Zlatko
Krastev/ACIT To: ADSM-L AT VM.MARIST DOT EDU
<acit@ATTGLOB cc:
AL.NET> Subject: Re: Problem with
Storagetek L20 and 5.1.6.2
Sent by:
"ADSM: Dist
Stor Manager"
<ADSM-L AT VM DOT MA
RIST.EDU>
23/02/2003
22:25
Please
respond to
"ADSM: Dist
Stor Manager"
How you did the upgrade (4.1.6 -> 5.1.6.2 or 4.1.6 -> 5.1.0.0 -> 5.1.6.0
-> 5.1.6.2 or otherwise)?
What is the fileset and version for the ITSM device driver?
You hope wrong or you hope normal :-)
Zlatko Krastev
IT Consultant
GUILLAUMONT Etienne <eguillau AT RGB-TECHNOLOGIE DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
21.02.2003 15:07
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Problem with Storagetek L20 and 5.1.6.2
Hello,
I juste upgraded my TSM server on AIX 4.3.3 to 5.1.6.2 from 4.1.6 and I
had
to reinstall the devices software at 4.1 level to have my Storagetek work.
The library functionned but the DLT1 drives where unable to read tapes. I
got the following message :
20.02.03 14:06:43 ANR8302E I/O error on drive DLT1.2 (/dev/mt1)
(OP=SETMODE,
Error Number=22, CC=207, KEY=FF, ASC=FF, ASCQ=FF,
SENSE=**NONE**, Description=Device is not in a state
capable of performing request). Refer to Appendix D
in
the 'Messages' manual for recommended action.
I just updated TSM to 5.1.6.2 and removed the drive and the library before
recreating them.
Did I do anything wrong or is it normal (I hope not)
Regards
Etienne GUILLAUMONT
e-mail : etienne AT rgb-technologie DOT fr
RGB Technologie
Parc d'Innovation, Bâtiment PYTHAGORE
11 Rue Jean SAPIDUS
67400 ILLKIRCH
Tél : 03 90 40 60 60
Fax : 03 90 40 60 61
|