Re: Problem with Storagetek L20 and 5.1.6.2

You seem to do everything correct and if it does not work the best way is 
to open a PMR with IBM. Try to rescreate the problem on another box.

Zlatko Krastev
IT Consultant






GUILLAUMONT Etienne <eguillau AT RGB-TECHNOLOGIE DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
25.02.2003 09:01
Please respond to "ADSM: Dist Stor Manager"

 
        To:     ADSM-L AT VM.MARIST DOT EDU
        cc: 
        Subject:        Re: Problem with Storagetek L20 and 5.1.6.2


I upgraded 4.1.6 -> 5.1.5 ->5.1.6.0 ->5.1.6.2 I don't remember the version
for the ITSM device driver as I went back but it was the latest available
on the tivoli server. But there was something peculiar : when I issued an
update all with the 5.1.5 cd, the devices were not updated and I had to
specifically install it.

To answer to you last question : I hope that the fact that the drivers
doesn't function is not normal ! :-))

regards


Etienne GUILLAUMONT
e-mail : etienne AT rgb-technologie DOT fr

RGB Technologie
Parc d'Innovation, Bâtiment PYTHAGORE
11 Rue Jean SAPIDUS
67400 ILLKIRCH
Tél :  03 90 40 60 60
Fax : 03 90 40 60 61


  
                    Zlatko   
                    Krastev/ACIT         To:     ADSM-L AT VM.MARIST DOT EDU    
  
 
                    <acit@ATTGLOB        cc:    
                    AL.NET>              Subject:     Re: Problem with 
Storagetek L20 and 5.1.6.2 
                    Sent by:   
                    "ADSM: Dist   
                    Stor Manager"   
                    <ADSM-L AT VM DOT MA   
                    RIST.EDU>   
  
  
                    23/02/2003   
                    22:25   
                    Please   
                    respond to   
                    "ADSM: Dist   
                    Stor Manager"   
  
  




How you did the upgrade (4.1.6 -> 5.1.6.2 or 4.1.6 -> 5.1.0.0 -> 5.1.6.0
-> 5.1.6.2 or otherwise)?
What is the fileset and version for the ITSM device driver?
You hope wrong or you hope normal :-)

Zlatko Krastev
IT Consultant






GUILLAUMONT Etienne <eguillau AT RGB-TECHNOLOGIE DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
21.02.2003 15:07
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Problem with Storagetek L20 and 5.1.6.2


Hello,

I juste upgraded my TSM server on AIX 4.3.3 to 5.1.6.2 from 4.1.6 and I
had
to reinstall the devices software at 4.1 level to have my Storagetek work.
The library functionned but the DLT1 drives where unable to read tapes. I
got the following message :

20.02.03   14:06:43  ANR8302E I/O error on drive DLT1.2 (/dev/mt1)
(OP=SETMODE,
                      Error Number=22, CC=207, KEY=FF, ASC=FF, ASCQ=FF,
                      SENSE=**NONE**, Description=Device is not in a state
                      capable of performing request).  Refer to Appendix D
in
                      the 'Messages' manual for recommended action.

I just updated TSM to 5.1.6.2 and removed the drive and the library before
recreating them.

Did I do anything wrong or is it normal (I hope not)

Regards

Etienne GUILLAUMONT
e-mail : etienne AT rgb-technologie DOT fr

RGB Technologie
Parc d'Innovation, Bâtiment PYTHAGORE
11 Rue Jean SAPIDUS
67400 ILLKIRCH
Tél :  03 90 40 60 60
Fax : 03 90 40 60 61