Eric,

My AIX guy agrees with Arnaud.  You didn't say whether you'd run his
step1.  That may be the key.  Certainly worked for us.


At 04:43 PM 2/7/2002 +0100, you wrote:

Hi Arnaud!
I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I
checked the Fibre Channel settings through the IBM StorWatch SAN Data
Gateway Specialist: The host type is set to AIX, so that shouldn't be the
cause...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines


-----Original Message-----
From: PAC Brion Arnaud [mailto:arnaud.brion AT PANALPINA DOT COM]
Sent: Thursday, February 07, 2002 16:07
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3494 through SAN Data Gateway


Hi Mr Loon,

I could be false, be I believe I remember we had the same problem, until
we updated values in the SDG, as said before :
1) disableCC
2) setHost 0, "aix"   or   setHost  0  AIX
3) setHost 1, "aix"   or   setHost  1  AIX
4) and reboot the device.
5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl
fcs?), and then rerun cfgmgr.



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Panalpina Management Ltd., IT Group     |
| Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland |
| Phone: +41 61 226 19 78 / Fax: +41 61 226 17 01       |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



-----Original Message-----
From: Loon, E.J. van - SPLXM [mailto:Eric-van.Loon AT KLM DOT COM]
Sent: Thursday, 07 February, 2002 15:57
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3494 through SAN Data Gateway


Hi *SM-ers!
My 3590 drives are working through the SAN Data Gateway now. The problem
wasn't related to the missing device package message, but it was a wrong
SCSI cable (one without a terminator). However, I still receive the
following message when running cfgmgr:

cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed. devices.fcp.array

I checked the AIX 4.3.3. CD, but it's not part of AIX. Could someone who
is using a SAN Data Gateway check if he/she has this fileset installed?
Maybe it is part of another fileset? I can't find anything about it, not
through IBM nor though Google. Thanks in advance! Kindest regards, Eric
van Loon KLM Royal Dutch Airlines


-----Original Message-----
From: Othonas Xixis [mailto:othonas AT US.IBM DOT COM]
Sent: Tuesday, February 05, 2002 19:47
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3494 through SAN Data Gateway


Eric,
in case Adolph's recommendation don't work, or cfgmgr gives you another
error then the problem is with your 2108 SAN Data Gateway (SDG). Go into
the SDG (SAN Data Gateway) firmware and execute the following actions:
1) disableCC
2) setHost 0, "aix"   or   setHost  0  AIX
3) setHost 1, "aix"   or   setHost  1  AIX
4) and reboot the device.
5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl
fcs?), and then rerun cfgmgr. This action should let see the SDG
transparent to the cfgmgr routine.

Cheers.

Othonas Xixis



"Loon, E.J. van - SPLXM" <Eric-van.Loon AT KLM DOT COM>@VM.MARIST.EDU> on
02/05/2002 01:00:33 PM

Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>

Sent by:    "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To:    ADSM-L AT VM.MARIST DOT EDU
cc:
Subject:    Re: 3494 through SAN Data Gateway



Hi Adolph!
Thank you very much! I will install it tomorrow.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines


-----Original Message-----
From: Adolph Kahan [mailto:akahan AT ICA DOT NET]
Sent: Tuesday, February 05, 2002 18:54
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3494 through SAN Data Gateway


This is part of AIX. It will be on the AIX install CDs.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Loon, E.J. van - SPLXM
Sent: Tuesday, February 05, 2002 12:41 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: 3494 through SAN Data Gateway

Hi *SM-ers!
I have just connected a 3494 library through a SAN Data Gateway. When I
run cfgmgr is detects the drives:

rmt5  Available 10-68-01     IBM 3590 Tape Drive and Medium Changer
(FCP)
rmt6  Available 10-68-01-4,0 IBM 3590 Tape Drive and Medium Changer
(FCP)

But it also returns the following error:

cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed. devices.fcp.array

This driver, is it a AIX driver or is it part of the TSM devices
package? Thanks in advance!! Kindest regards, Eric van Loon KLM Royal
Dutch Airlines


**********************************************************************
For information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain
confidential and privileged material intended for the addressee only. If
you are not the addressee, you are notified that no part of the e-mail
or any attachment may be disclosed, copied or distributed, and that any
other action related to this e-mail or attachment is strictly
prohibited, and may be unlawful. If you have received this e-mail by
error, please notify the sender immediately by return e-mail, and delete
this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
subsidiaries and/or its employees shall not be liable for the incorrect
or incomplete transmission of this e-mail or any attachments, nor
responsible for any delay in receipt.
**********************************************************************